NEC Express 5800/120Lg, Service Manual, Page: 48 / 204

3-6 Configuring Your System
Primary and Secondary Master and Slave IDE Submenus
Feature
Choices or
Display Only
Description Your Setting
Type Auto
None
Select Auto if a device is
attached to the IDE channel.
Multi-Sector Transfer
Disabled
2 Sectors
4 Sectors
8 Sectors
16 Sectors
Specifies the number of
sectors that are transferred
per block during multiple
sector transfers. This field is
informational only, for Type
Auto.
PI0 Mode Standard
FPIO 1
FPIO 2
FPIO 3
FPIO 4
FPIO 3 / DMA 1
FPIO 4 / DMA 2
Select the method for moving
data to/from the drive. This
field is informational only, for
Type Auto. This field is
updated to display only the
modes supported by the
attached device.
Ultra DMA
Mode 2
Selects the Ultra DMA mode
used for moving data to/from
the drive. This field is
informative only for Type
Auto.
Processor Settings Submenu
Feature
Choices or
Display Only
Description Your Setting
Processor POST
Speed Setting Information Only Displays measured processor
speed.
Processor Retest Disabled
Enabled
If yes, BIOS will clear
historical processor status
and retest all processors on
the next boot. After retesting,
BIOS resets this option
automatically to “Disable”.
Hyper-Threading Disabled
Enabled
Specifies whether Hyper-
Threading Technology is
enabled or disabled.
Processor 1 CPUID CPUID
Not Installed
Disabled
Reports CPUID for Processor
1, if present.
If empty, reports
Vacant. If disabled by BMC,
reports Disabled.
Processor 1 L2 Cache
Size Information Only Displays L2 Cache Size for
Processor 1.
Processor 2 CPUID CPUID (OFXX)
Not Installed
Disabled
Reports CPUID for Processor
2, if present.
If empty, reports
Vacant. If disabled by BMC,
reports Disabled.
Processor 2 L2 Cache
Size Information Only Displays L2 Cache Size for
Processor 2.