![background image](http://html.mh-extra.com/html/nec/express-5800-120lg/express-5800-120lg_service-manual_251153128.webp)
4-62
Disassembly and Reassembly
Tower Feet
Your tower system has four stabilizer feet located on the bottom of the chassis.
To remove the stabilizer feet you must have the chassis positioned on its side
with its stabilizer feet overhanging the edge of a table or workbench.
To remove the tower feet (see Figure 4-57), perform the following procedures:
1.
Prepare your system for disassembly. See
Preparing Your System for
Disassembly and Reassembly
earlier in this chapter.
2.
Position the chassis on it side and move it to the edge of a table or
workbench so that its stabilizer feet overhang the surface rim.
3.
Remove and save the two screws attaching a foot to the bottom of the
chassis.
4.
Slide the foot towards the rear of the chassis and remove the foot from the
chassis.
5.
Repeat steps 3 and 4 to remove the other feet from the chassis.
A
B
C
A
Chassis foot
B
Screws (2 per foot)
C
Work surface
Figure 4-57. Removing the Tower Feet
Summary of Contents for Express 5800/120Lg
