NEC Express 5800/120Lg, Service Manual

Page: 170 / 204

A-2 Specifications
System Specifications
Item NEC Express5800/120Lg
Type
Intel

Xeon

processor
(1.8GHz/512KB)
Intel

Xeon

processor
(2.66GHz/512KB)
Number of
processors 1
CPU
Maximum 2
Chipset E7501
Standard
256 MB (128 MB
×
2) 512 MB (256 MB
×
2)
Maximum 4GB (The standard DIMM must be replaced.)
Expansion unit 2 DIMMs (256/512/1024MB)
Expansion times 2 times (The standard DIMM must be replaced.)
Memory module SDRAM DIMM (DDR266, Registered)
Memory
Error check ECC
Graphics (VRAM) ATI RAGE XL (VRAM 8MB)
Floppy disk
(standard)
3.5-inch drive
×
1 (standard)
Hard disk (standard) None (Hot-swap)
Hard disk
(maximum)
876 GB (146 GB
×
6)
Auxiliary
input
device
CD-ROM (standard)
ATAPI interface
×
1 (x48 speed)
5.25-inch file bay 4 slots (Standard ATAPI CD-ROM drive is installed.) *
3.5-inch device bay 6 slots (Hot-swap)
PCI (64-
bit/100MHz) 4 slots Additional
slot
PCI (32-bit/33MHz) 2 slots
LAN interface
1000BASE-T/100BASE-TX/10BASE-T (1 port),
100BASE-TX/10BASE-T (1 port)
Keyboard MINI DIN 6-pin connector (1 port)
Mouse MINI DIN 6-pin connector (1 port)
USB 4-pin (3 ports)
Serial D-sub 9-pin (2 ports)
Parallel D-sub 25-pin (1 port)
Network RJ-45 (2 ports)
Display MINI D-sub 15-pin (1 port)
External
interface
SCSI Ultra320/160 SCSI (1 port)
(An exclusive use with internal SCSI for hard disk drive)
Cabinet design Desk-side, mini tower
External dimensions
292.1* (width)
×
453 (height)
×
681 (depth) mm
* including stabilizers
Weight 35 kg (Max.)
Power supply
100 to 120 VAC
±
10%, 200 to 240 VAC
±
10%, 50/60 Hz
±
1 Hz
(Hot-swap)
Power consumption 480 VA, 465 W
Temperature 10 to 35°C
Environmental
requirements
Humidity 20 to 80% RH (no condensation)
Others NEC EXPRESSBUILDER supported, NEC ESMPRO provided in
the standard configuration
* A maximum of three file devices can be installed in this system
(including standard ATAPI CD-ROM drive).