NEC Express 5800/120Lg, Service Manual, Page: 112 / 204

4-46 Disassembly and Reassembly
!
Set "PCI SLOT n ROM (n: slot number)," a parameter of the slot in
which a hard disk is installed, to "Enable" in "PCI Configuration" on the
Advanced menu of the BIOS utility SETUP.
!
Replacement of disk array controller board
Restore the disk array configuration information in the disk array
controller boards. Use the configuration utility for the restoration. Refer
to the online document saved in CD-ROM "EXPRESSBUILDER"
coming with the server or the documentation coming with the disk array
controller for details. If a disk array controller is replaced, create the
configuration information newly by using the proper utility.
!
When more than one disk array controller board are installed in the
server, install the disk array controller board to which the system disk to
be booted is connected in the lowest PCI slot number. For example, if
four disk array controller boards are installed in PCI slots #1 to #4, the
system disk should be connected to the board installed in PCI slot #2.
PCI Slot Boot Priority
PCI Slot Number Boot Priority
PCI slot #1 6
PCI slot #2 5
PCI slot #3 4
PCI slot #4 3
PCI slot #5 2
PCI slot #6 1