![background image](http://html.mh-extra.com/html/nec/express-5800-120lg/express-5800-120lg_service-manual_251153074.webp)
4-8
Disassembly and Reassembly
Processor Air Duct
To install or remove the DIMM or a processor, you will need to remove the air
duct.
IMPORTANT:
Do not assemble the server without installing the air duct. If the
duct is not installed in the system, reduced cooling efficiency and can affect
performance or cause damage due to overheating.
Removal
Follow these steps to remove the air duct.
1.
Prepare your system for upgrade. See
Preparing Your System for
Disassembly and Reassembly
described earlier in this chapter.
2.
Remove the side cover.
3.
Hold the left side of the air duct, and push the right end of the tab to release
from the chassis. See Figure 4-3.
4.
Remove the duct from the chassis.
Figure 4-3. Removing the Air Duct
Summary of Contents for Express 5800/120Lg
