NEC Express 5800/120Lg, Service Manual

Page: 104 / 204

4-38 Disassembly and Reassembly
Removable 5.25-inch Media Devices
A variety of SCSI 5.25-inch removable media devices (i.e., tape backup, etc.)
can be installed in the four half-height media bays (Figure 4-38). The media
devices should be installed in the first available media bay from the top
(slot 1). Contact your sales representative or dealer for a list of approved
devices.
Figure 4-38. Removable Media Devices
IMPORTANT:
! With the standard configuration, the optional SCSI add-in card and
SCSI cable are required.
! The server can include a maximum of two half-height devices and one
full-height device.
! Set the SCSI termination of the 5.25-inch device to be installed to OFF
and the SCSI ID to a value which is not duplicated or corrupted with
that of any other device. Refer to the documentation coming with each
of the devices for how to set the values.
! For half-height device, first install a device in slot 1. Then install
another device in slot 2.
For full-height device, install the device to the slots 2 and 3.
! This system can include a maximum of two optional file devices.
Slot 3
Slot 2
Slot 1