NEC Express 5800/120Lg, Service Manual

Page: 117 / 204

Disassembly and Reassembly 4-51
5. Remove the four screws securing the bezel hinge to the chassis and remove
the hinge. See Figure 4-49.
A
B
A Screws (4)
B Bezel hinge
Figure 4-49. Removing the Front Bezel Hinge
6.
Install the replacement bezel hinge using the four screws removed in Step 5.
7. Align the front bezel with the bezel hinges and install the metal pins into the
top and bottom slots in the bezel hinge.
Front Panel
Your server system contains a front panel that houses the system controls and
indicators. You must open the front bezel to access the front panel. The front
panel is secured to the front of the chassis by hooks and a locking lever. To
remove the front panel its locking lever must be released and the panel moved
up slightly to disengage its hooks from the chassis.
To remove the front panel (see Figure 4-50), perform the following procedures:
1. Prepare your system for disassembly. See Preparing Your System for
Disassembly and Reassembly earlier in this chapter.
2.
Remove the left-hand side access panel of the system chassis following
procedures previously described in this chapter.
!
CAUTION
For proper cooling and airflow, do not operate the system
with the side access panel removed. Always
replace the
panel before powering on the system.