NEC EXP320A, User Manual

Page: 280 / 427

Installing and Using Utilities 5-55
Maintenance of the Server
The server maintenance can be done in two ways; one is to use NEC ESMPRO Manager for remote
maintenance and the other is to use the NEC ESMPRO Agent Server Maintenance Utility on the
server for local maintenance.
TIPS:
To start the NEC ESMPRO Agent Server Maintenance Utility installed in server, select the items
as follows:
Start Menu
o
[All Programs]
o
[NEC ESMPRO Agent]
o
[Server Maintenance Utility]
The maintenance functions that can be executed from NEC ESMPRO include three types, those
common to all components, those specific to particular components, and general system settings.
The maintenance functions common to all components are operated in the same way basically (the
operation procedure and typical examples of screen images are described below).
The table below lists the maintenance functions common to all components.
Start Stop
MTBF
clear
Diag-
nosis
F/W
update
Component
R L R L R L R L R L
CPU module
— — — — — —
– –
— —
IO module
— — — — — — — —
– –
PCI slot – – – – – – – – – –
Ethernet board – – – – – – – – – –
SCSI adapter – – – – – – – – – –
SCSI enclosure – – – – – – – – – –
SCSI electronics – – – – – – – – – –
SCSI slot – – – – – – – – – –
R: Remote. Executable from remote management PC by using NEC ESMPRO Manager
L: Local. Executable on local server by using Server Maintenance Utility
— : Support
–: Not support
The maintenance operations in the table cannot be performed while collecting dump or updating
firmware. Wait until such processing is finished to perform the operations in the table.