4-22 System Configuration
Option Parameter
Description
BMC Firmware Revision
̛
Displays the BMC information.
SDR Revision
̛
Displays the revision of SDR (sensor
device information).
PIA Revision
̛
Displays the PIA (plat form information)
revision.
Module#0 BMC MAC Address*
̛
Displays the BMC MAC address of
CPU/IO module#0.
Module#1 BMC MAC Address*
̛
Displays the BMC MAC address of
CPU/IO module#1.
[ ]: Factory-set
* MAC address information is shown only when the N8815-001/001A ft Remote Management Card
is installed. (Installed in standard for 320Fb-M and 320Fb-MR models)
Console Redirection
Select "Console Redirection" on the System Hardware menu and press
Enter
to display the
following screen.
See the table below for setup options on the screen.
Option Parameter
Description
BIOS Redirection
Port
[Disabled]
Enabled
Enable or disable Console Redirection. By enabling
this option, you can remotely control behavior during
POST.
Baud Rate*
9600
[19.2K]
38.4K
57.6K
115.2K
Select a port rate used for the interface with a
hardware console to be connected.
Summary of Contents for EXP320A
