4-36 Configuring Your Server
4.
Select two hard disk drives for RAID and press
Insert
.
When you press
Insert
, the selected drive is added to the [Selected Drives] list box at
right. If you wish to delete any drive, select the one from the list box at left, and press
Delete
. Then, the drive will be erased from the list box at right.
NOTES:
Up to two hard disk drives can be connected to the onboard SATA
connector of the server. RAID configuration requires two or more
hard disk drives. Therefore, select two hard disk drives displayed in
the list.
The grayed-out hard disk drive indicates the disk with no usable
disk space, or uninitialized disk. Press
Esc
several times to exit this
menu. See "Initializing Hard Disk Drives" described later.
5.
Press
Enter.
[Array Properties] for detailed setting of RAID appears.
6.
Select the desired RAID level using the cursor key and press
Enter.
Select either RAID0 (striping) or RAID1 (mirroring).
Summary of Contents for EXP200
