![background image](http://html.mh-extra.com/html/nec/exp200/exp200_user-manual_251123089.webp)
Configuring Your Server 4-27
IMPORTANT:
This option sets [SATA RAID Enabled] in the
[Advanced] - [I/O Device Configuration] menu to [Disabled]. If the
SATA hard disk drives are installed in your server and the onboard
SATA RAID feature is used, change the parameter of the [SATA RAID
Enabled] from [Disabled] to [Enabled] before exiting BIOS Setup.
Leaving this parameter as the factory-set value (Disabled) may destroy
the data in hard disk drive.
NOTE:
To display the [SATA RAID Enabled] menu, select
[Advanced] - [I/O Device Configuration] - [SATA Controller Mode
Option] - [Enhanced].
Discard Changes
Select this item to return the values modified currently to the previous values before saving the
values to CMOS.
Save Changes
Select this item to save the newly selected information to CMOS (non-volatile memory) without the
termination of SETUP.
Summary of Contents for EXP200
