![background image](http://html.mh-extra.com/html/nec/exp200/exp200_user-manual_251123093.webp)
Configuring Your Server 4-31
6.
Press
F2
during POST to run the BIOS Setup utility, and configure the mother board
again.
IMPORTANT:
If the SATA hard disk drives are installed in your
server and the onboard SATA RAID feature is used, change the
parameter of the [SATA RAID Enabled] in the [Advanced] - [I/O
Device Configuration] menu from [Disabled] to [Enabled] before
exiting BIOS Setup. Leaving this parameter as the factory-set value
(Disabled) may destroy the data in hard disk drive.
NOTE:
To display the [SATA RAID Enabled] menu, select
[Advanced] - [I/O Device Configuration] - [SATA Controller Mode
Option] - [Enhanced].
Summary of Contents for EXP200
