![background image](http://html.mh-extra.com/html/nec/exp200/exp200_user-manual_251123271.webp)
Upgrading Your Server 9-33
8.
Connect the interface and power cables to the 5.25-inch device installed from one side of
the server.
See Chapter 10 for details.
NOTE:
Connect the interface cable of the floppy disk drive so that the
end with the red line indicating pin 1 faces the mother board.
9.
Assemble the server.
10.
Set the parameters including the transfer rate using the BIOS utility of the SCSI controller.
Refer to the manual provided with the SCSI controller for details.
11.
Install the device driver for the installed device.
Refer to the manual provided with the device for details.
CD-ROM drive
REAR
FRONT
Floppy disk drive
Red line
Summary of Contents for EXP200
