![background image](http://html.mh-extra.com/html/nec/exp200/exp200_user-manual_251123251.webp)
Upgrading Your Server 9-13
7.
Place the removed hard disk drive on a flat and rigid place, and put the hard disk drive
carrier over it.
8.
Align the screw holes of the hard disk drive with those of the hard disk drive bay and
secure the hard disk drive with four screws (two each for right and left sides).
IMPORTANT:
Use the screws provided with the hard disk drive.
Using screws longer than the required length may cause the hard disk
drive to be damaged.
9.
Hold the lever of the hard disk drive carrier and insert it into the slot, then secure it with
two screws.
Summary of Contents for EXP200
