![background image](http://html.mh-extra.com/html/nec/exp200/exp200_user-manual_251123149.webp)
Installing the Operating System with Express Setup 5-43
Graphics Accelerator Driver
Standard graphics accelerator drivers that are mounted will be installed automatically. The
following is the procedure when it is necessary to install manually.
If you want to utilize optional Graphics Accelerator Driver board, follow the document attached to
the board to install the driver.
1.
Insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive.
2.
Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer].
3.
Run "SETUP.EXE" in the following directory.
<CD-ROM Drive Letter>:\WINNT\W2K\VIDEO\SETUP.EXE.
4.
Follow the message to continue the installation.
If the dialog message "Digital Signature could not been found." appears, select [Yes] to
continue.
5.
Remove the NEC EXPRESSBUILDER CD-ROM from the CD-ROM drive, and restart
the system.
USB 2.0 Driver
USB 2.0 Driver is pre-installed.
When restoring the system or re-installing the system, the driver is automatically installed in the
process of updating the system.
Summary of Contents for EXP200
