9-22 Upgrading Your Server
Installation
Install the board to be connected to the PCI board slot depending on the following procedure. Refer
to the manual provided with the board.
1.
Before the installation, set the switches and jumpers on the installed board appropriately
referring to the manual provided with the board, if necessary.
2.
See the section "Preparing for Installation and Removal" described earlier to prepare.
3.
Remove the left side cover.
4.
Remove the additional slot cover at the same location (height) as the installation slot.
IMPORTANT:
Store the removed slot cover for future use.
Summary of Contents for EXP200
