NEC EXP200, User Manual

Page: 224 / 370

8-16 Troubleshooting
Problems with Windows Server 2003 and Windows 2000
Cannot install the operating system correctly.
T
Did you confirm the notes on installing the operating system?
→
See Chapter 6.
During installation, the following warning is registered in the System Log of the Event Viewer:
Error detected on the device \Device\CdRom0
during the paging operation.
→
There is no problem on this issue.
Fail to start the OS:
T
Is a floppy disk in the floppy disk drive?
→
Take out the floppy disk and restart the server.
T
Is the NEC EXPRESSBUILDER CD-ROM in the CD-ROM drive?
→
Take out the NEC EXPRESSBUILDER CD-ROM and restart the server.
T
Is the OS broken?
→
Use recovery process to recover the system. (See "Recovery for Windows 2000
System" in this Chapter.)
Unable to update the system
T
Are you trying to update the system without applying Service Pack or with Service
Pack 1, 2, or 3?
Without applying Service Pack and applying Service Pack 1, 2, or 3 to this system are
not supported.
You have to apply Service Pack 4 to update the system.
If you use Windows 2000 CD-ROM which includes Service Pack 4 to install
Windows 2000 on your system, you do not have to apply Service Pack 4 again
when you update the system.
The OS presents unstable operation:
T
Did you update the system?
→
Installing a network drive after installation of the OS may cause unstable
operation. Use the NEC EXPRESSBUILDER CD-ROM to update the system.
(See Chapter 6.)