NEC Aspire S IntraMail System Manual Download

Page: 71 / 266

Conversation Record

IntraMail for Aspire System Guide

Chapter 2: Features

◆

Step 3

Set the maximum length of recorded conversations.

3.1

47-01-03: Subscriber Message Length

on page 194.

- The length of a recorded conversation is 10 times this interval.
- The range for this option is

1-4095

seconds.

- Since the Conversation Record time cannot exceed 4095 seconds, any settings in this

option larger than 409 have no effect on the length of recorded conversations.

✔

By default, this option is

120

seconds. This means the default length of recorded conversa-

tions is 1200 seconds (20 minutes).

Operation

Conversation Record

[Super Display Soft Key] - [Keyset Soft Key]

To record your active call in your mailbox:

■

Only one party on a call can use Conversation Record at any one time. This includes Intercom calls and
Conference calls.

Press your Voice Mail Record key.

■

You hear 2 beeps and your Voice Mail Record key

ashes. The beeps periodically repeat to remind you that

you are recording. You and your caller hear the voice prompt “recording.”

To turn conversation record off:

Press your Voice Mail Record key.

■

Recording stops.

■

There are no options available while recording (such as pause, resume, and exit).

Summary of Contents for Aspire S IntraMail











































































































































































































































































Search results

Summary of Contents for Aspire S IntraMail

Reviews:

Related manuals for Aspire S IntraMail

Brands by name

Popular brands

NEC Aspire S IntraMail, System Manual

Search results

Summary of Contents for Aspire S IntraMail

Reviews:

Related manuals for Aspire S IntraMail

Brands by name

Popular brands