NEC Aspire S IntraMail System Manual Download Page 173

Page: 173 / 266

Subscriber Mailbox

IntraMail for Aspire System Guide

Chapter 2: Features

◆

163

Next Call Routing Mailbox

(page 140)

The Next Call Routing Mailbox provides additional dialing options after a caller leaves a message in a
Subscriber Mailbox.

Security Code

(page 157)

If enabled, a subscriber must enter a security code before logging onto their Subscriber Mailbox.

System Administrator

(page 164)

A Subscriber Mailbox designated as a System Administrator provides the subscriber with unique system
administration capabilities through the

menu.

Unscreened Transfer

(page 174)

The Subscriber Mailbox can optionally convert Automated Attendant Screened Transfers to Unscreened
Transfers.

Programming

Step 1

Set up a Subscriber Mailbox.

1.1

47-02-01: Mailbox Active

on page 200.

- Activate (

) the Subscriber Mailbox.

✔

By default, Subscriber Mailboxes 1-8 are active (

). All other Subscriber Mailboxes are

inactive (

1.2

47-02-02: Mailbox Number

on page 200.

- Assign the mailbox number to each active Subscriber mailbox. Normally, the mailbox

number is the same as the extension number.

✔

By default, mailboxes 1-8 correspond to mailbox numbers 301-308.

Step 2

Check to be sure message waiting lamping is enabled for the Subscriber Mailbox.

2.1

47-02-08: Message Waiting Lamp

on page 202.

- Enter

(Yes) to enable Message Waiting lamping for each Subscriber Mailbox.

✔

By default, this option is

(Yes).

Step 3

Set the maximum length of recorded messages left in the Subscriber Mailbox

3.1

47-01-03: Subscriber Message Length

on page 194.

- Set the maximum length (

1-4095

seconds) of recorded messages for:

- Subscriber Mailbox users dialing

to record and send a message.

- Extension users leaving a message in a Subscriber Mailbox.
- Outside Automated Attendant callers accessing a mailbox via a GOTO command

and then dialing

to record and send a message.

- Subscriber Mailbox Greetings.
- Announcement Messages.
- Call Routing Mailbox Instruction Menus.

✔

By default, these types of messages are

120

seconds long maximum.

Step 4

Set the maximum length of recorded Quick Messages left in the Subscriber Mailbox.

4.1

47-01-04: Non-Subscriber Message Length

on page 194.

- Set the maximum length (

1-4095

seconds) of recorded messages for:

- Automated Attendant callers leaving a message or Quick Message in a Subscriber

Mailbox.

- Outside callers transferred by an extension user to a Subscriber Mailbox.

✔

By default, these types of messages are

120

seconds long maximum.

Operation

N/A

Summary of Contents for Aspire S IntraMail











































































































































































































































































Search results

Summary of Contents for Aspire S IntraMail

Reviews:

Related manuals for Aspire S IntraMail

Brands by name

Popular brands

NEC Aspire S IntraMail, System Manual

Search results

Summary of Contents for Aspire S IntraMail

Reviews:

Related manuals for Aspire S IntraMail

Brands by name

Popular brands