NEC Aspire S IntraMail System Manual Download

Page: 166 / 266

Screened Transfer

156

◆

Chapter 2: Features

IntraMail for Aspire System Guide

Dial Action Table

(page 62)

nes the dialing options for the Call Routing Mailbox chosen by the active Answer Table.

Forced Unscreened Transfer

(page 85)

The Subscriber Mailbox can optionally convert Automated Attendant Screened Transfers to Unscreened
Transfers.

Unscreened Transfer

(page 174)

After an Automated Attendant caller dials an extension, IntraMail immediately transfers the call to the
destination and hangs up.

Programming

Step 1

Assign the TRF action to a key on the active Dial Action Table.

1.1

47-13-01: Dial Action Table Actions: TRF Action - Screened Transfer (1)

on page 236.

- Normally, the corresponding

Number

option should be XXX. Note that the key you choose

for this action is the

rst digit of the called extension number.

- For example, to allow callers to place Screened Transfers to extensions 301-399, for

key 3 enter TRF for the

Action

and XXX for the corresponding

Number

- To have Screened Transfer call a speci

c extension, the corresponding

Number

option should

be that extension’s number. The caller then dials that single digit to reach the extension.

- For example, to have callers dial 8 to reach extension 303, for key 8 enter TRF for

the

Action

and 303 for the corresponding

Number

✔

By default, key 3

Action

is UTRF and

Number

is XXX. This means that Automated Atten-

dant callers can place Unscreened Transfers to extensions 301-399.

Step 2

Set how long a Screened Transfer will ring an unanswered extension before recalling to the
Automated Attendant.

2.1

47-08-02: Screened Transfer Timeout

on page 219.

- Set how long a Screened Transfer (TRF) from the Automated Attendant will ring (

0-255

seconds) an unanswered extension before recalling.

- Be sure that the

24-02-04: Transfer Recall Time

interval is longer than the setting of this

option. If the Transfer Recall interval is shorter, Screened Transfers will recall the same as
Unscreened Transfers.

✔

By default, this option is

seconds.

Operation

N/A

Summary of Contents for Aspire S IntraMail











































































































































































































































































Search results

Summary of Contents for Aspire S IntraMail

Reviews:

Related manuals for Aspire S IntraMail

Brands by name

Popular brands

NEC Aspire S IntraMail, System Manual

Search results

Summary of Contents for Aspire S IntraMail

Reviews:

Related manuals for Aspire S IntraMail

Brands by name

Popular brands