NEC Aspire S IntraMail System Manual Download Page 101

Page: 101 / 266

Greeting

IntraMail for Aspire System Guide

Chapter 2: Features

◆

Operation

Setting Up Auto Attendant Do Not Disturb and Recording a Greeting

(Prior to software version 2.64)

[Super Display Soft Key] - [Keyset Soft Key]

Log onto Subscriber Mailbox.

(4)

Access the Mailbox Greeting options.

[Greeting] - [Greet]

IntraMail plays a summary of your current settings.

(5)

Listen to the active greeting (if recorded).

[Listen] - [Lstn]

Exit listen mode.

(6)

Turn Auto Attendant Do Not Disturb off or on.

[DND ON] - [N/A]
[DND OFF] - [N/A]

(7)

Record a new greeting (if not recorded), or rerecord the current greeting.

[Record] - [Rec]

Record at the tone, then press # when done.

Pause or restart recording.

[Resume] - [Resume]
[Pause] - [Pause]

(3)

Erase the greeting.

[Cancel] - [Cncl]

End the recording.

[Done] - [Done]

(3)

Erase the currently recorded greeting (if any).

[Erase] - [Erase]

Go back to mailbox Main Menu.

[Exit] - [Exit]

Plays Help message.

Summary of Contents for Aspire S IntraMail











































































































































































































































































Search results

Summary of Contents for Aspire S IntraMail

Reviews:

Related manuals for Aspire S IntraMail

Brands by name

Popular brands

NEC Aspire S IntraMail, System Manual

Search results

Summary of Contents for Aspire S IntraMail

Reviews:

Related manuals for Aspire S IntraMail

Brands by name

Popular brands