NEC Aspire S IntraMail System Manual Download Page 126

Page: 126 / 266

Make Call

116

◆

Chapter 2: Features

IntraMail for Aspire System Guide

3.2

14-06-01: Trunk Group Routing

- Set up Trunk Group Routing. There are 8 routing tables, with 4 routes in each table.

✔

By default, the

rst route in routing table 1 is trunk group 1. No other entries are de

ned.

This makes trunk group 1 the dial 9 route by default.

3.3

Refer to

Trunk Group Routing

in the

Aspire Software Manual

(P/N 0893200) for more.

Step 4

Enable Loop Supervision for the trunks on which you are going to allow remote logons to
use Make Call.

4.1

14-01-13: Basic Trunk Data Setup - Loop Supervision

- Enter 1 to enable Loop Supervision for each trunk to be used for External Transfer.

✔

By default, this option is enabled for all trunks.

Step 5

If you are going to allow remote logos to use Make Call, enable Trunk-to-Trunk Transfer for all
IntraMail extensions.

5.1

20-11-14: Class of Service Options (Hold/Transfer Service) - Trunk-to-Trunk Transfer

- For each IntraMail extension to be used for External Transfer (343-350), enter 0 to enable

Trunk-to-Trunk Transfer. (Entering 1 disables Trunk-to-Trunk Transfer).

✔

By default, Trunk-to-Trunk Transfer is enabled (0) for all IntraMail extensions (343-350).

5.2

20-06-01: Class of Service for Extensions

- Assign Class of Service to extensions (1-15).

✔

By default, IntraMail extensions (343-350) have Class of Service 1.

Operation

Using Make Call from your Mailbox

[Super Display Soft Key] - [Keyset Soft Key]

Log onto Subscriber Mailbox.

(5)

Listen to the message for which you want to make a return call.

[Listen] - [Lstn]

(62)

Dial this code while listening to the message you want to return.

[Callback] - [N/A]

■

Make Call automatically places a return call to the co-worker that left you the message.

■

If your system has Caller ID, Make Call can automatically place a return call to your
outside caller.

■

If you hear “

Your call cannot go through,

” your system’s Caller ID is not properly set

up. You go right back to the listen mode for the message you were listening to when
you tried the Make Call.

■

Summary of Contents for Aspire S IntraMail











































































































































































































































































Search results

Summary of Contents for Aspire S IntraMail

Reviews:

Related manuals for Aspire S IntraMail

Brands by name

Popular brands

NEC Aspire S IntraMail, System Manual

Search results

Summary of Contents for Aspire S IntraMail

Reviews:

Related manuals for Aspire S IntraMail

Brands by name

Popular brands