60
7. Operation
7-9-9 Mini puck low warning ON/OFF
This function informs when the number of mini pucks has decreased.
* When the number of mini pucks decreases by 50 pucks or more during game operation due to loss or
other reasons, the 4-digit score in the left side score LED blinks while the machine is in the standby
state to inform that the number of mini pucks has decreased.
Score LED
Time LED
Setting item selection display (Mini puck low warning ON/OFF)
In this Setting Item Selection Mode, “PC-A” is displayed in the left side score LED and warning
“on/oFF” and the mini puck decrease count is displayed in the right side score LED.
Press the Enter button (green). The right side score LED display blinks and the machine enters
the Setting Change Mode.
In the Setting Change Mode,
fl
ip the Select switch up and down to change the setting.
z
The values that can be set are “oFF” (warning off) and “on” (warning on).
z
When set to “on”, the right two digits of the right side score LED display the mini puck decrease
count (number of mini pucks supplied to the playing
fi
eld - number of mini pucks that have
entered the goals). Values less than 0 are displayed as 0, and values greater than 99 are
displayed as 99.
z
To reset the mini puck decrease count to 0, press the Service button (red) in the Setting
Change Mode.
z
The mini puck decrease count is also reset to 0 when the setting value is changed from “on”
to “oFF”.
* The default setting (factory setting) is “on” (warning on).
Press the Enter button (green) again to return to the Setting Item Selection Mode.
z
Make sure that there are ten mini pucks in each of the right and left sides of the
mini puck stock area before resetting the mini puck decrease count. (See “7-8-7 S
Hopper Motor ON/OFF Test and Sensor Check” on page 48.)
z
Be sure to press the Service switch (red) and reset the mini puck decrease count to
0 when starting up the game for the fi rst time or when adding mini pucks.
M259_07_ENin6.indd 60
M259_07_ENin6.indd 60
2/5/2013 8:06:59 AM
2/5/2013 8:06:59 AM