142
8B. Service
- Must be performed by a technician -
8B-4-3 Rail (L) and (R) Assemblies
(1) Replacing the Rail (L) and (R) Sensors (Upper) and (Middle)
The description below explains how to replace the (L) side. Follow the same procedure for replacement of
the (R) side.
z
To avoid electric shock, accidents or injuries to yourself or other people, or damage to the electronic
circuits, be sure to turn off the power switch before starting work.
Turn off the power switch. (See “7-6-1 Turning the Power Switch On” on page 39.)
Remove the rail (L) assembly by reversing the installation procedure. (See steps
-
of
“8A-2-5 Installing the Side Tower Assembly” on page 96.)
Disconnect the two connectors of the rail (L) sensor (upper) and (middle).
Remove the two Hex nuts with
fl
ange (M3), and remove the rail sensor bracket (B).
Rail sensor bracket (B)
Hex nut with
fl
ange
Connector
Hook
M259_08B_ENin6.indd 142
M259_08B_ENin6.indd 142
2/5/2013 8:11:59 AM
2/5/2013 8:11:59 AM