1. Safety Precautions -Be sure to read to ensure safe operation-
2
1-3 Critical Safety Precautions
z
Should an abnormality occur, turn off the power switch immediately to stop operations. Then, be
sure to disconnect the power cord plug from the outlet. Operating the machine while the abnormality
persists may result in a fi re or accident.
z
This machine includes important parts used to ensure the safety of players and bystanders.
Operating the machine while these “important parts for ensuring player and bystander safety” are
broken, damaged or deteriorated, or with defective installation may result in an injury to the players
or bystanders. If you discover an abnormality, replace the affected part immediately. To order parts,
contact your distributor.
z
Dust accumulating on the power cord plug may result in a fi re. Inspect the plug regularly and remove
any dust.
z
Fully insert the power cord plug into the outlet. Poor contact may generate heat and result in a fi re
or burns.
z
Damage to the power cord may result in a fi re, electric shock or electrical leakage. Be sure to observe
the following.
•
Keep the power cord away from heaters.
•
Do not twist the power cord.
•
Do not forcibly bend the power cord.
•
Do not alter the power cord.
•
Do not pull the power cord. (Always unplug
by holding the plug and not the power cord.)
•
Do not bundle the power cord.
•
Do not place objects on the power cord.
•
Do not allow the power cord to be caught
between the machine and other devices or
the wall.
•
Do not do anything else that might damage
the power cord.
z
Do not expose the power cord and power cord plug to water. It may result in electric shock or
electrical leakage.
z
Do not touch the power cord plug with wet hands. It may result in electric shock.
z
The power capacity of the machine is AC 120 V (or 220 V), maximum current consumption 3 A. To
prevent fi re and electric shock, use indoor wiring that conforms to these power supply specifi cations.
z
Use a power supply voltage range of AC 110 V to 130 V (or 210 V to 230 V). Using a voltage outside
this range may result in a fi re or electric shock. However, to ensure that the machine operates in the
optimum condition, keep the voltage at AC 120 V (or 220 V) as much as possible.
z
To ensure safe use of the machine, be sure to perform the pre-operation inspection (See “7-4 Pre-
operation Inspection” on page 35.) and service (See “8B Service” on page 109.). Omitting these
inspections or service may result in an accident.
z
Use the consumables and service parts (including screws) that are specifi ed by NAMCO BANDAI
Games Inc. To order parts, contact your distributor.
z
Do not modify the machine without permission. Do not perform any operations that are not described
in this Operation Manual. Modifying the machine may create unforeseen hazards.
z
If you decide to transfer ownership of this machine, be sure to provide this Operation Manual with
the machine.
M259_01_EN.indd 2
M259_01_EN.indd 2
2/5/2013 7:41:25 AM
2/5/2013 7:41:25 AM
