Test Mode
Troubleshooting
101
Assembly
8A. Installation and Assembly
- Must be performed by a technician -
Remove the service door R. (See “8A-5-2 Opening and Closing the Service Doors L and R” on
page 107.)
Connect the three connectors inside the cabinet (R) assembly.
Connector
Cabinet (R) assembly
Connector
Insert the tip of the rail (R) assembly into the square hole in the front side of the hopper assembly,
and hook the hook on the opposite side of the rail (R) assembly onto the corner rail (R).
Rail (R) assembly
Square hole
(front side)
Hopper assembly
Corner rail (R)
Rail (R) assembly
Hook
M259_08A_ENin6.indd 101
M259_08A_ENin6.indd 101
2/5/2013 8:09:48 AM
2/5/2013 8:09:48 AM