manualshive.com logo in svg

NAMCO PAC-MAN SMASH, Operation Manuals

NAMCO PAC-MAN SMASH is a thrilling arcade game that brings back the beloved classic Pac-Man in a whole new way. To ensure you make the most out of your gaming experience, download the comprehensive Operation Manual from our website for free. Master the game and unleash the nostalgic fun!

Share
Download
background image

111

Test Mode

Inspection and Service

Troubleshooting

8B. Service

- Must be performed by a technician -

 (2) Cleaning the Rail (L) and (R) Assemblies

The description below explains how to clean the (L) side. Follow the same procedure to clean the (R) side.

 

z

To avoid electric shock, accidents or injuries to yourself or other people, or damage to the electronic 
circuits, be sure to turn off the power switch before starting work.

 

z

  Do not use thinner, benzene, gasoline, alcohol or other organic solvents. This may 

degrade the materials.

  Turn off the power switch. (See “7-6-1 Turning the Power Switch On” on page 39.)

  Remove the rail (L) assembly by reversing the installation procedure. (See steps 

 - 

 of 

“8A-2-5 Installing the Side Tower Assembly” on page 96.)

  Wipe away any dirt from the puck paths using a soft cloth moistened with water or a neutral 

cleanser diluted with water and then 

fi

 rmly wrung out.

* Use a cotton swab to clean narrow parts.

Rail (L) assembly

Puck path

Rail (R) assembly

Puck path

  Wipe dry using a soft cloth so that no water or detergent remains, and then allow to dry completely.

  To install, perform the procedure in reverse.

M259_08B_ENin6.indd   111

M259_08B_ENin6.indd   111

2/5/2013   8:11:43 AM

2/5/2013   8:11:43 AM

Summary of Contents for PAC-MAN SMASH























































































































































































































Reviews:

No comments

Related manuals for PAC-MAN SMASH

Table Hockey DMI Sports HT300 Assembly Instructions Manual preview
HT300
Brand: Table Hockey DMI Sports Pages: 6
Global VR 040-0050-01 System Manual preview
040-0050-01
Brand: Global VR Pages: 48
GAMES MICROSOFT XBOX KINGDOM UNDER FIRE Manual preview
KINGDOM UNDER FIRE
Brand: GAMES MICROSOFT XBOX Pages: 18
Sony PlayStation Vita PCH-Z0C1 Quick Start Manual preview
PlayStation Vita PCH-Z0C1
Brand: Sony Pages: 2
Sony PLAYSTATION SCPH-103 Manual preview
PLAYSTATION SCPH-103
Brand: Sony Pages: 72
Excalibur Plug & Play Kickboxing VR20 Instruction Manual preview
Plug & Play Kickboxing VR20
Brand: Excalibur Pages: 1
Franklin BOOKMAn XGT-2043 User Manual preview
BOOKMAn XGT-2043
Brand: Franklin Pages: 24
Excalibur Solitaire Glow 370G Operating Manual preview
Solitaire Glow 370G
Brand: Excalibur Pages: 5
Hasbro Beyblade Grevolution 82770 Owner'S Manual preview
Beyblade Grevolution 82770
Brand: Hasbro Pages: 2
Accudart eX3000 Instructions And Rules preview
eX3000
Brand: Accudart Pages: 24
Tiger Electronics Gigapets 71-614 Instruction Manual preview
Gigapets 71-614
Brand: Tiger Electronics Pages: 2
Radica Games Jibbi Instruction Manual preview
Jibbi
Brand: Radica Games Pages: 2
MD SPORTS TP600Y20095 Assembly Instructions Manual preview
TP600Y20095
Brand: MD SPORTS Pages: 6
Sega SHENMUE II Manual preview
SHENMUE II
Brand: Sega Pages: 16
Sega THE HOUSE OF THE DEAD 3 Manual preview
THE HOUSE OF THE DEAD 3
Brand: Sega Pages: 22
Sega Sonic Adventure 2 Instruction Manual preview
Sonic Adventure 2
Brand: Sega Pages: 17
Sega Sonic Adventure Instruction Manual preview
Sonic Adventure
Brand: Sega Pages: 17
Sega Sega Rally 2 Instruction Manual preview
Sega Rally 2
Brand: Sega Pages: 13

Brands by name

Popular brands

Load more brands