82
8A. Installation and Assembly
- Must be performed by a technician -
Set the corner covers (red • L, red • R, blue • L and blue • R) on the respective corners of the
cabinet, and secure them with two button head bolts (M6 x 40), one button head bolt (M6 x 25)
and three
fl
at washers (M6) each.
Corner cover (Blue • R)
Corner cover (Blue • L)
Corner cover
(Red • L)
Corner cover (Red • R)
Button head bolt (M6 x 40)
Flat washer (M6)
Flat washer (M6)
Flat washer (M6)
Button head bolt
(M6 x 25)
Button head bolt
(M6 x 40)
z
If the bolts are diffi cult to tighten, loosen the screws fi xing the goal bumper (L)
•
(R)
and corner bumper, shift each bumper towards the outside of the table, and then
tighten the screws.
z
If any of the bumper fi xing screws are loose, tighten the screws.
z
When installing, be careful not to pinch the harnesses and connectors.
Corner cover (Red • R)
Corner bumper
Goal bumper (R)
Tighten the bolts temporarily secured in steps
and
, and secure the goal (L) and (R)
assemblies.
Close the goal (L) assembly. (See “7-5-3 Opening and Closing the Goal (L) and (R) Assemblies”
on page 38.)
M259_08A_ENin6.indd 82
M259_08A_ENin6.indd 82
2/5/2013 8:09:31 AM
2/5/2013 8:09:31 AM
