80
8A. Installation and Assembly
- Must be performed by a technician -
Attach the table top assembly to the cabinet with six button head bolts (M6 x 40) and six spring
washers (M6).
z
It may be diffi cult to attach the screws if the fl oor surface is not level. In this case,
adjust the level adjusters so that the cabinet is level.
Button head bolt
(M6 x 40)
Spring washer
(M6)
Table top assembly
Insert the goal (L) and (R) assemblies removed in steps
and
into the cabinet from
above. At this time, insert the lower edges of the goal (L) and (R) assemblies into the goal set
brackets.
Goal set bracket
Goal (L) assembly
Open the goal (L) assembly. (See “7-5-3 Opening and Closing the Goal (L) and (R) Assemblies”
on page 38.)
M259_08A_ENin6.indd 80
M259_08A_ENin6.indd 80
2/5/2013 8:09:29 AM
2/5/2013 8:09:29 AM
