136
8B. Service
- Must be performed by a technician -
8B-4 Removing, Installing and Replacing Assemblies
and Parts
8B-4-1
Table
(1) Removing and Installing the Goal (L) and (R) Assemblies
The description below explains how to remove and install the L side. Follow the same procedure to remove
and install the R side.
z
To avoid electric shock, accidents or injuries to yourself or other people, or damage to the electronic
circuits, be sure to turn off the power switch before starting work.
z
When lifting up the goal (L) or (R) assembly, be sure to perform the work with two or more people.
Turn off the power switch. (See “7-6-1 Turning the Power Switch On” on page 39.)
Remove the two button head bolts (M6 x 40), one button head bolt (M6 x 25) and three
fl
at
washers (M6) from each corner cover.
Button head bolt (M6 x 25)
Flat washer (M6)
Flat washer (M6)
Button head bolt (M6 x 40)
Slide the corner covers toward the outside, and remove them.
z
When removing and installing, be careful not to pinch the harness and connectors.
Open the goal (L) assembly. (See “7-5-3 Opening and Closing the Goal (L) and (R) Assemblies”
on page 38.)
M259_08B_ENin6.indd 136
M259_08B_ENin6.indd 136
2/5/2013 8:11:55 AM
2/5/2013 8:11:55 AM
