manualshive.com logo in svg

NAMCO PAC-MAN SMASH, Operation Manuals

NAMCO PAC-MAN SMASH is a thrilling arcade game that brings back the beloved classic Pac-Man in a whole new way. To ensure you make the most out of your gaming experience, download the comprehensive Operation Manual from our website for free. Master the game and unleash the nostalgic fun!

Share
Download
background image

8A. Installation and Assembly

Test Mode

Troubleshooting

103

Assembly

- Must be performed by a technician -

  Remove the four Phillips hexagon socket head bolts (with 

fl

 at and spring washers) (M6 x 16), 

and remove the two caster brackets (R).

Caster bracket (R)

Hexagon socket head bolt
(with 

fl

 at and spring 

washers) (M6 x 16)

 

z

  The removed caster brackets (R) and bolts are required during transport. Be sure to 

keep them in a safe place.

[This completes the assembly work. Go to “8A-2-6 Preparing the Pucks and Mallets”. If the bolt 
holes were not aligned in step 7, perform the procedure below.]

  Remove the rear panel. (See “8A-5-3 Opening and Closing the Rear Panel” on page 108.)

  Loosen the four Phillips pan head screws (with 

fl

 at and spring washers) (M4 x 10).

  Loosen the four Phillips pan head screws (with 

fl

 at and spring washers) (M4 x 35), and adjust 

so that the sloped area matches the height of the playing 

fi

 eld.

Phillips pan head screw (with 

fl

 at and spring washers) (M4 x 10) (loosen)

Phillips pan head screw (with 

fl

 at and spring washers) (M4 x 35) (loosen)

M259_08A_ENin6.indd   103

M259_08A_ENin6.indd   103

2/5/2013   8:09:51 AM

2/5/2013   8:09:51 AM

Summary of Contents for PAC-MAN SMASH























































































































































































































Reviews:

No comments

Related manuals for PAC-MAN SMASH

Nintendo POKMON MYSTERY DUNGEON:EXPLORERS OF TIME Instruction Booklet preview
POKMON MYSTERY DUNGEON:EXPLORERS OF TIME
Brand: Nintendo Pages: 40
SPARTAN sport Spartan Echowell DC 100 Target User Manual preview
Spartan Echowell DC 100 Target
Brand: SPARTAN sport Pages: 14
Global VR 040-0050-01 System Manual preview
040-0050-01
Brand: Global VR Pages: 48
Gemini 2510 Owner'S Manual preview
2510
Brand: Gemini Pages: 16
Beleduc 22490 Instruction preview
22490
Brand: Beleduc Pages: 36
Beleduc 22431 Instruction preview
22431
Brand: Beleduc Pages: 28
Beleduc 22430 Instruction preview
22430
Brand: Beleduc Pages: 28
Beleduc 22770 Instruction preview
22770
Brand: Beleduc Pages: 36
Oregon Scientific Barbie Learning Game Instruction Manual preview
Barbie Learning Game
Brand: Oregon Scientific Pages: 2
Coastal Amusements Monkey Mania Manual preview
Monkey Mania
Brand: Coastal Amusements Pages: 9
Radica Games 75013 Word Scramble Instruction Manual preview
75013 Word Scramble
Brand: Radica Games Pages: 2
Radica Games Tetris Tower 3D 74033 Instruction Manual preview
Tetris Tower 3D 74033
Brand: Radica Games Pages: 2
KICK Arcadia Brown Assembly Instructions Manual preview
Arcadia Brown
Brand: KICK Pages: 11
KICK Phoenix Black Assembly Instructions Manual preview
Phoenix Black
Brand: KICK Pages: 13
KICK Triology Black Assembly Instructions Manual preview
Triology Black
Brand: KICK Pages: 15
LAI Games MEGA STACKER LITE Operator'S Manual preview
MEGA STACKER LITE
Brand: LAI Games Pages: 56
GAMES MICROSOFT XBOX NIGHTCASTER-DEFEAT THE DARKNESS Manual preview
NIGHTCASTER-DEFEAT THE DARKNESS
Brand: GAMES MICROSOFT XBOX Pages: 16
Saitek Alchemist Quick Start Manual preview
Alchemist
Brand: Saitek Pages: 9

Brands by name

Popular brands

Load more brands