110
8B. Service
- Must be performed by a technician -
8B-1-2 Cleaning the Puck Paths
(1) Cleaning the Insides of the Goal (L) and (R) Assemblies
The description below explains how to clean the (L) side. Follow the same procedure to clean the (R) side.
z
To avoid electric shock, accidents or injuries to yourself or other people, or damage to the electronic
circuits, be sure to turn off the power switch before starting work.
z
Do not use thinner, benzene, gasoline, alcohol or other organic solvents. This may
degrade the materials.
Turn off the power switch. (See “7-6-1 Turning the Power Switch On” on page 39.)
Open the goal (L) assembly. (See “7-5-3 Opening and Closing the Goal (L) and (R) Assemblies”
on page 38.)
Wipe away any dirt from the puck paths using a soft cloth moistened with water or a neutral
cleanser diluted with water and then
fi
rmly wrung out.
Puck path
Wipe dry using a soft cloth so that no water or detergent remains, and then allow to dry completely.
To install, perform the procedure in reverse.
M259_08B_ENin6.indd 110
M259_08B_ENin6.indd 110
2/5/2013 8:11:42 AM
2/5/2013 8:11:42 AM
