![background image](http://html1.mh-extra.com/html/namco/pac-man-smash/pac-man-smash_operation-manuals_704740122.webp)
120
8B. Service
- Must be performed by a technician -
(4) Inside the L or S Bucket (Hopper Assembly)
z
To avoid electric shock, accidents or injuries to yourself or other people, or damage to the electronic
circuits, be sure to turn off the power switch before starting work.
Turn off the power switch. (See “7-6-1 Turning the Power Switch On” on page 39.)
Remove the side tower assembly. (See “8B-4-4 (1) Removing and Installing the Side Tower
Assembly” on page 145.)
Remove any pucks from inside the L or S bucket, and then remove the jammed puck.
To install, perform the procedure in reverse.
(5) Inside a Hopper Disk or Hopper Bottom (Hopper Assembly)
The description below explains how to remove jammed pucks from the S hopper disk. Follow the same
procedure to remove jammed pucks from the L hopper disk.
z
To avoid electric shock, accidents or injuries to yourself or other people, or damage to the electronic
circuits, be sure to turn off the power switch before starting work.
Do not perform the following operations. Doing so may cause pucks to jam or other
malfunctions.
z
Rotating the L hopper disk in the clockwise direction as viewed from above.
z
Rotating the S hopper disk in the counter-clockwise direction as viewed from above.
Turn off the power switch. (See “7-6-1 Turning the Power Switch On” on page 39.)
Remove the side tower assembly. (See “8B-4-4 (1) Removing and Installing the Side Tower
Assembly” on page 145.)
Remove the S hopper disk. (See steps
-
of “8B-1-2 (4) Cleaning the Hopper Disks
and Hopper Bottoms (Hopper Assembly)” on page 113.)
Remove the jammed puck.
To install, perform the procedure in reverse.
M259_08B_ENin6.indd 120
M259_08B_ENin6.indd 120
2/5/2013 8:11:50 AM
2/5/2013 8:11:50 AM