155
Test Mode
Troubleshooting
Removing, Installing and Replacing
Assemblies and Parts
8B. Service
- Must be performed by a technician -
(3) Replacing the S Hopper Motor
z
To avoid electric shock, accidents or injuries to yourself or other people, or damage to the electronic
circuits, be sure to turn off the power switch before starting work.
Turn off the power switch. (See “7-6-1 Turning the Power Switch On” on page 39.)
Remove the side tower assembly by reversing the installation procedure. (See steps
-
of “8A-2-5 Installing the Side Tower Assembly” on page 96.)
Remove the wing bolt (M4 x 6), slide the S hopper cover toward the outside, and remove it.
Wing bolt (M4 x 6)
S hopper cover
Remove the cord clip and disconnect the two connectors.
Loosen the four pan head screws (with
fl
at and spring washers) (M4 x 10), and remove the S
hopper motor bracket.
Phillips pan head screw
(with
fl
at and spring
washers) (M4 x 10) (loosen)
Connectors
Cord clip
S hopper motor bracket
M259_08B_ENin6.indd 155
M259_08B_ENin6.indd 155
2/5/2013 8:12:09 AM
2/5/2013 8:12:09 AM