![background image](http://html1.mh-extra.com/html/namco/pac-man-smash/pac-man-smash_operation-manuals_704740037.webp)
Test Mode
Troubleshooting
35
Important Parts for Ensuring Player and Bystander Safety / Pre-operation Inspection
7. Operation
7-4
Pre-operation
Inspection
Check the items below before starting machine operations. If there is an abnormality, resolve it by referring to
“8B-3 Troubleshooting” on page 130.
7-4-1 Safety Inspection Items (Before Power On)
z
Before operating the machine, check the following locations. This is required to prevent accidents
or injury.
(1) Are all warning labels in place? (See “1-4 Machine Warning Labels” on page 3.)
(2) Are all warning labels legible? (See “1-4 Machine Warning Labels” on page 3.)
(3) Are all level adjusters adjusted properly? (See “8A-2-2 Level Adjuster Adjustment” on page 90.)
(4) Is the speci
fi
ed play zone provided? (See “5-1-2 Play Zone for the Installed Machine” on page 25.)
(5) Is the power cord laid out safely so that it will not cause players or other customers to trip over it?
(6) Is the power cord securely connected to the outlet and the power supply input of the machine? (See
“8A-3 Connecting the Power Cord and Ground” on page 106.)
(7) Is the power cord plug free from dust?
(8) Are the mallets damaged?
(9) Are the mallet grips loose?
(10) Are the net S, net L, center guard or side guards damaged? (See “7-3 Important Parts for Ensuring
Player and Bystander Safety” on page 34.)
(11) Are the goal covers or corner covers damaged?
(12) Are the guide L or guide R damaged?
Inspect the following items after turning on the power switch. If you discover an abnormality, turn off the power
switch immediately to stop operations. Then, disconnect the power cord plug from the outlet and contact your
distributor.
(13) Is any part of the power cord or plug abnormally hot?
(14) Does touching the machine give a tingling electric shock?
(15) Is there a burning smell, abnormal noise or vibration?
(16) Is there any other abnormality or malfunction?
M259_07_ENin6.indd 35
M259_07_ENin6.indd 35
2/5/2013 8:06:49 AM
2/5/2013 8:06:49 AM