manualshive.com logo in svg

Muratec MFX-2830, Operation Manual, Page: 460 / 471

Share
Download
Muratec MFX-2830 Operation Manual Download Page 460

In This

Case...

In This Case... 

●

 Maintenance and Troubleshooting

5-40

Symptom

Cause

Countermeasure

Reference page

The  paper  comes  out  solid 
black. 

The drum cartridge is worn out or 
broken.

Replace with a new drum cartridge.

5-17

The machine might malfunction.

Contact your Muratec dealer.

    

The paper comes out blank.

Several  sheets  of  paper  were  fed 
through at the same time.

Flutter the pages before setting pa-
per.

1-29

The drum cartridge has run out of 
toner.

Replace with a new drum cartridge.

5-17

The drum cartridge is worn out or 
broken.

Replace with a new drum cartridge.

5-17

The machine has malfunctioned.

Contact your Muratec dealer.

    

Is  the  document  facing  the  right 
side?

Set the document correctly.

1-42

There are blank spots

PRINTER

PRINTER

The paper is damp.

Replace with a new paper.

1-29

You are using the wrong type of pa-
per.

Use the right type of paper.

1-26

The document glass is dirty.

Clean the document glass.

5-20

The paper comes out wrinkled 
or with the letters blurry

You are using the wrong type of pa-
per.

Use the right type of paper.

1-26

The paper is damp.

Replace with a new paper.

1-29

 There are blanks in the direc-
tion the paper is fed

PRINTER 

PRINTER
PRINTER
PRINTER 

PRINTER 
PRINTER 

The drum cartridge is not set prop-
erly.

Set the drum cartridge properly.

5-17

The drum cartridge is worn out or 
broken.

Replace with a new drum cartridge.

5-17

The ADF glass is dirty.

Clean the ADF glass.

5-20

Summary of Contents for MFX-2830
























































































































































































































































































































































































































































































Reviews:

No comments