Muratec MFX-2830, Operation Manual

Page: 290 / 471

FAX
Chapter2
FAX Chapter2
●
Advanced Fax Features
3-112
To change the settings of F-code boxes...
Repeat the setting process, pressing
[Clear]
to delete information you want to change, and then enter the new settings.
To change the box type...
Delete the F-code box you want to change, then register it again.
In this case
■
Entering an I.D. code
Relay Box
Select item to edit.
Enter 2/2
I.D.Code :
(1) Press [ ] [ ] , then press
[I.D.Code] .
Relay Box
Enter I.D.Code/password
Enter
2/2
I.D.Code :
Clear
Enter
I.D.Code
****_
Cancel
(2) Enter the I.D. code (4 digits)
using the numeric keypad,
then press
[Enter]
.
6
To continue to register other
F-code boxes, press [Enter] , then
repeat from step 5 of “Registering
F-code boxes” on page 3-100.
If you enter an incorrect
code, press
[Clear] to de-
lete it and then enter the
correct one.
Note
Press
RESET
to return to
the standby screen.
Note
I.D. code must be entered
to print out stored docu-
ments, etc. Make a record
not to forget it.
Note