manualshive.com logo in svg

Multitech RF600, User Manual

The Multitech RF600 User Manual is a comprehensive guide that provides detailed instructions on how to make the most of your RF600 device. Easily downloadable for free from our website, this manual contains all the information you need to unlock the full potential of your product.

Share
Download
background image

Chapter 6 – RouteFinder Software  

Multi-Tech Systems, Inc. RouteFinderVPN RF760/660/600VPN User Guide (PN S000323D) 

88 

Network Setup > DHCP Client 

 

Network Setup > DHCP Client 

On this screen you can enable DHCP Client (Dynamic Host Configuration Protocol), which is a TCP/IP protocol that enables 
PCs and workstations to get temporary or permanent IP addresses out of a pool from centrally-administered servers. This 
screen will provide user messages such as the one shown is red. Later, it will display the Current DHCP Client Status. For 
example: DHCP Client has not yet obtained an IP address from the DHCP server. 

Important:

 If PPPoE is enabled, then DHCP client cannot be enabled. The interface to the internet can be either through 

PPPoE or DHCP client at any time. 

If DHCP client is enabled and if the IP address has been assigned, then the following values will be displayed on this screen: 

•

 

Assigned IP Address 

•

 

Mask 

•

 

DHCP 

•

 

DNS Address 

•

 

Gateway Address 

•

 

Renew Time (time at which the DHCP client should begin trying to contact its server to renew the lease it has 
obtained). 

•

 

Expiry Time (time at which the DHCP client must stop using the lease if it has not been able to contact a server in 
order to renew it). 

 

 

DHCP Settings  

DHCP Client on WAN 

To Enable DHCP Client on WAN, check the corresponding checkbox. 

Save 

Click the 

Save

 button after enabling this function. 

Summary of Contents for RF600






























































































































































































Reviews:

No comments

Related manuals for RF600

Pathport 6824 Manual preview
6824
Brand: Pathport Pages: 3
H3C Voice Gateway H3C VG 10-10 Safety Manual preview
Voice Gateway H3C VG 10-10
Brand: H3C Pages: 31
H3C SR6602-I AI Series Installation Manual preview
SR6602-I AI Series
Brand: H3C Pages: 80
H3C SR6602-I AI Series Hardware Information preview
SR6602-I AI Series
Brand: H3C Pages: 33
H3C SecPath M9000 Series Quick Manual preview
SecPath M9000 Series
Brand: H3C Pages: 4
H3C SecPath M9000 Series Installation, Quick Start preview
SecPath M9000 Series
Brand: H3C Pages: 15
H3C MSR3610-I Series Installation, Quick Start preview
MSR3610-I Series
Brand: H3C Pages: 5
H3C SecPath M9000 Series Compliance And Safety Manual preview
SecPath M9000 Series
Brand: H3C Pages: 57
Lantronix PremierWave 2050 User Manual preview
PremierWave 2050
Brand: Lantronix Pages: 73
Lantronix EMG 8500 Quick Start Manual preview
EMG 8500
Brand: Lantronix Pages: 2
NetComm NL20 Quick Start Manual preview
NL20
Brand: NetComm Pages: 20
McQuay IM 689-2 Installation & Maintenance Data preview
IM 689-2
Brand: McQuay Pages: 52
T-Mobile TMO-G4AR User Manual preview
TMO-G4AR
Brand: T-Mobile Pages: 25
Ositech Communications Ositech Titan II Getting Started Manual preview
Ositech Titan II
Brand: Ositech Communications Pages: 4
Eaton POW-R-COMMAND 1000 Quick Start Manual preview
POW-R-COMMAND 1000
Brand: Eaton Pages: 8
Juniper SRX 5800 Hardware Manual preview
SRX 5800
Brand: Juniper Pages: 536
VBOX XTI 3442 Quick Installation Manual preview
XTI 3442
Brand: VBOX Pages: 40
Technicolor TG788v v3 Setup And User Manual preview
TG788v v3
Brand: Technicolor Pages: 82

Brands by name

Popular brands

Load more brands