Chapter 6 – RouteFinder Software
Multi-Tech Systems, Inc. RouteFinderVPN RF760/660/600VPN User Guide (PN S000323D)
44
Administration > System Setup
Configure Email Notifications the RouteFinder VPN Will Send
Select the types of notifications that you want sent. Click the
Add
button. The name will then appear in the
Send
Email Notification For
box. You can remove a type by clicking the
Delete
button. The name will than move back
to the
Don't Send Email Notification For
box.
1.
Export Backup (the backup file will be attached)
2.
File Intrusion Detection (File Integrity Checks and Network Intrusions)
3.
High CPU/RAM Usage (Hard disk usage exceeding 70%)
4.
Disk Clean Up – Low Diskspace
5.
System Key Expired (10 days before expiry)
6.
Invalid Web Login
7.
Invalid SSH Login
8.
Port Intrusion Detected
9.
PPP backup link down
10.
PPP backup link up
11.
URL Filtering Server Error
12.
Auto System Update
13.
Virus Key Will Expire
14.
Virus Key Has Expired
15.
Virus Database Updated
16.
URL Filtering Key Expired
17.
URL Filtering Key Will Expire (10 days, 2 days, and 1 day before expiry)
18.
URL Filtering Categories Updated
19.
URL Categories Update Failed
20.
Bayesian Database Has Reached Maximum
21.
POP3 Virus Mail
22.
HTTP Access Deny Reports
The mail settings are saved in the server configuration. The first email ID in the list should be the Administrator's
ID, so that when the first ID is added or deleted, the session is terminated and the Web server restarted.
SNMP Agent – Community Name
Type the community name for the SNMP Agent.
System Logging
Check the
Logging Status
box to activate and enable the host to receive log messages from other machines.
Select the type of logging, either
Local
or
Remote
.
Then type the IP address of the
Remote Syslog Host
to which all log messages from the RouteFinder will be
forwarded. Click
Save
. The IP address is a required parameter.
On the remote host, syslog should be invoked with the "-r" option to enable the host to receive log messages
from other machines. This is especially recommended if you want to collect the log files of several systems on
one host. The default setting is ’off’.
System Time
Select the system time, time zone, and current date.
Note:
It is not recommended that you change from summertime to wintertime and back. We suggest entering
Greenwich Mean Time (GMT), regardless of your global position, especially if you plan to operate Virtual Private
Networks across different time zones. Changing the system time can lead to the following time-warp effects:
Forward time adjustment (winter to summertime)
•
The time-out for the
Web Admin
has expired and your session is not valid anymore.
•
Log information for some time periods may be missing in the time-based reports.
•
Most diagrams show this time period as a straight line at the height of the old value.
•
All the values for Accounting in this time period are 0.
Backward time adjustment (summer to wintertime)
•
The time-based reports already contain log information for the corresponding time period which, as far
as the system is concerned, comes from the future: this information is not overwritten, but is retained.
•
The writing of the log files is continued from the point of time before the setback time is reached.
•
Most diagrams show the values of this time period as compressed.
•
The already-recorded data (from the future) retain their validity for the Accounting function.
•
The accounting files are continued when the setback time is reached again. Therefore, it is
recommended that the time should only be set once during initial configuration and later should only
be slightly adjusted. No adjustments from wintertime to summertime should be made, especially if the
collected reporting and accounting information is to be further processed.