manualshive.com logo in svg

Multitech RF600, User Manual

The Multitech RF600 User Manual is a comprehensive guide that provides detailed instructions on how to make the most of your RF600 device. Easily downloadable for free from our website, this manual contains all the information you need to unlock the full potential of your product.

Share
Download
background image

Chapter 6 – RouteFinder Software  

Multi-Tech Systems, Inc. RouteFinderVPN RF760/660/600VPN User Guide (PN S000323D) 

80 

Proxy > SOCKS Proxy 

Proxy > SOCKS Proxy 

SOCKS is a universal proxy supported by many client applications. SOCKS5 is an IETF (Internet Engineering Task Force) 
approved standard, proxy protocol for TCP/IP-based networking applications. The basic purpose of the protocol is to enable 
hosts on one side of a SOCKS server to gain access to hosts on the other side of a SOCKS Server without requiring direct 
IP access. When an application client needs to connect to an application server, the client connects to a SOCKS proxy 
server. The proxy server connects to the application server on behalf of the client and then relays data between client and 
the application server. For the application server, the proxy server is the client.  

Differences Between SOCKS and NAT: 

•

 

SOCKS allows BIND requests (listening on a port on behalf of a client; however, very few clients support this function) 

•

 

SOCKS5 allows user authentication.  

•

 

The SOCKS proxy is used for point-to-point connections. 

The RouteFinder‘s SOCKS implementation supports the SOCKS v4 and the SOCKS v5 protocol versions. However, 
when using SOCKS v4, 

User Authentication

 is not possible. 

Socks Default Port

 –

 1080. Almost all clients will default to this port setting, so it normally does not need to be configured.  

Notes:

 

 All changes in 

Proxy

 become effective immediately without additional notice. 

 

 

SOCKS Proxy  

Status 

To enable SOCKS, check the 

Status

 box. Click the 

Save

 button.  

External Interface 

The SOCKS Proxy uses an external interface to send outgoing requests. Select the interface that you want 
to use. The options are LAN, WAN, and DMZ. This is the external interface to the Internet. 

Internal Interface 

Select one or two interfaces on which SOCKS is to accept connections from clients. The options are LAN, 
WAN, and DMZ. The interfaces listed here can be used by clients with port 1080 to access the SOCKS 
proxy.  

User Authentication 

To enable User Authentication, check the User Authentication box. If this function is enabled, SOCKS 
proxy users must log in with their user names and passwords. User Authentication is available with 
SOCKSv5 only. If you are using SOCKSv4, User Authentication is not available.  

Authentication Types 

Select the method of user authentication. Options are Local, RADIUS, and Sam. If you choose the Local 
method, you can choose whether or not local users may use the SOCKS proxy.  
If you disable User Authentication, then client applications must be configured with empty user name and 
password fields!  

Summary of Contents for RF600






























































































































































































Reviews:

No comments

Related manuals for RF600

Yacht Devices NMEA 0183 User Manual preview
NMEA 0183
Brand: Yacht Devices Pages: 36
ZIEHL-ABEGG DIG-2019NE Original Operating Instructions preview
DIG-2019NE
Brand: ZIEHL-ABEGG Pages: 23
B meters RFM-C2 WMBUS User Manual preview
RFM-C2 WMBUS
Brand: B meters Pages: 29
Memotec NetPerformer SDM-9220 Series Hardware Installation Manual preview
NetPerformer SDM-9220 Series
Brand: Memotec Pages: 146
Miromico LoRaWAN FMLR PicoCell Quick Start Manual preview
LoRaWAN FMLR PicoCell
Brand: Miromico Pages: 8
Gree TD GUD 30/01 Installation Manual preview
TD GUD 30/01
Brand: Gree Pages: 12
Plugwise Adam Installation Manual preview
Adam
Brand: Plugwise Pages: 28
Aluratek CDW530AM User Manual preview
CDW530AM
Brand: Aluratek Pages: 63
daviteq STHC-B-ISG02DB-03 User Manual preview
STHC-B-ISG02DB-03
Brand: daviteq Pages: 25
Bpt HAC/200 Instruction Manual preview
HAC/200
Brand: Bpt Pages: 25
Endress+Hauser Fieldgate SFG500 Operating Instructions Manual preview
Fieldgate SFG500
Brand: Endress+Hauser Pages: 52
gefran R-ECAT Installation And Operation Manual preview
R-ECAT
Brand: gefran Pages: 2
NET UX2000 SBC Configuration Manual preview
UX2000 SBC
Brand: NET Pages: 52
Avaya ClearOne Converge Pro VH20 Application Notes preview
ClearOne Converge Pro VH20
Brand: Avaya Pages: 38
NetPing SMS User Manual preview
SMS
Brand: NetPing Pages: 14
Nortel BSG12 Regulatory And Safety Information preview
BSG12
Brand: Nortel Pages: 2
Nortel BSG12aw Quick Start Manual preview
BSG12aw
Brand: Nortel Pages: 12
Nortel BSG12aw Installation Manual preview
BSG12aw
Brand: Nortel Pages: 66

Brands by name

Popular brands

Load more brands