manualshive.com logo in svg

Multitech RF600, User Manual

The Multitech RF600 User Manual is a comprehensive guide that provides detailed instructions on how to make the most of your RF600 device. Easily downloadable for free from our website, this manual contains all the information you need to unlock the full potential of your product.

Share
Download
background image

Appendix G - Technical Support  

Multi-Tech Systems, Inc. RouteFinderVPN RF760/660/600VPN User Guide (PN S000323D) 

161 

 
 

Appendix G – Technical Support 

 

Technical Support Contacts 

 

Country 

By Email 

By Phone 

France: 

[email protected] 

(33) 1-64 61 09 81 

India:  

[email protected] 

91 (124) 6340778 

U.K.: [email protected] 

(44) 118 959 7774 

U.S. and Canada:  

[email protected] (800) 

972-2439 

Rest of the World:  

[email protected] (763) 

717-5863 

Internet Address: 

http://www.multitech.com

 

FTP Address: 

ftp://ftp.multitech.com

. 

 
 

 

Recording RouteFinder Information 

Please fill in the following information on your Multi-Tech RouteFinder. This will help tech support in answering your 
questions. (The same information is requested on the Warranty Registration Card.) 
Model No.: _________________________ 
Serial No.: _________________________ 
Software Version: ____________________   
License Key No.: _____-_____-_____-_____ 
URL Filter Key _______________________ 

These numbers are located on the bottom of your RouteFinder. The Software Version is displayed at the top of the Home 
screen. 

Provide the configuration information (e.g., Default Gateway and other IP addresses used) from the Address Table in 
Chapter 2 of this manual, as well as any available

 LiveLog

 or 

Statistics & Logs

 information.   

Record the Node ID# from the RouteFinder's back panel; it may be required by the ISP for administration purposes or 
connection identification. Every device that contains an Ethernet NIC (Network Interface Card) has an assigned Media 
Access Control (MAC) address to identify it and/or differentiate it from any other network-attached device. 

 

 
Also, note the status of your RouteFinder including LED indicators, screen messages, diagnostic test results, problems with 
a specific application, etc. 

Summary of Contents for RF600






























































































































































































Reviews:

No comments

Related manuals for RF600

THOR H-1ASI-IP-B User Manual preview
H-1ASI-IP-B
Brand: THOR Pages: 20
Moxa Technologies MGate MB3480 Quick Installation Manual preview
MGate MB3480
Brand: Moxa Technologies Pages: 6
Datapulse Intuition 1000 Operator Training Manual preview
Intuition 1000
Brand: Datapulse Pages: 26
LifeShield WGC1000 Installation Instructions preview
WGC1000
Brand: LifeShield Pages: 2
Samson 5007-2 Series Mounting And Operating Instructions preview
5007-2 Series
Brand: Samson Pages: 72
ViewSonic PJ-WPD-200 User Manual preview
PJ-WPD-200
Brand: ViewSonic Pages: 34
ICP DAS USA GW-7228 User Manual preview
GW-7228
Brand: ICP DAS USA Pages: 48
Quark-Elec QK-A032 Manual preview
QK-A032
Brand: Quark-Elec Pages: 22
Kaon PG2141 Quick Installation Manual preview
PG2141
Brand: Kaon Pages: 5
TRI02SYS EnOcean 02LINE Installation And Operating Manual preview
EnOcean 02LINE
Brand: TRI02SYS Pages: 4
Coalesenses iSense User Manual preview
iSense
Brand: Coalesenses Pages: 30
ELKOR ETBAC Installation Manual preview
ETBAC
Brand: ELKOR Pages: 2
ZyXEL Communications AMG1001-T10A Specifications preview
AMG1001-T10A
Brand: ZyXEL Communications Pages: 2
ViewSonic WPG-360 Specification Sheet preview
WPG-360
Brand: ViewSonic Pages: 1
Cooper Atkins NotifEye Manual preview
NotifEye
Brand: Cooper Atkins Pages: 21
2N VoiceBlue Next Installation Manual preview
VoiceBlue Next
Brand: 2N Pages: 9
Weishaupt WEM-KNX Installation And Operating Manual preview
WEM-KNX
Brand: Weishaupt Pages: 36
Avaya AudioCodes MP-118 Configuring preview
AudioCodes MP-118
Brand: Avaya Pages: 51

Brands by name

Popular brands

Load more brands