Multitech RF600 User Manual Download

Page: 110 / 189

Chapter 6 – RouteFinder Software

Multi-Tech Systems, Inc. RouteFinderVPN RF760/660/600VPN User Guide (PN S000323D)

110

VPN > IPSec > Manual

Local LAN

This is the local security gateway for which the security services are to be provided. If the RouteFinder
acts as a host, this should be configured as

None

Remote Gateway IP

This is the interface in which the IPSec tunnel ends. In the case of a Road Warrior with a Dynamic IP
address, this should be configured as

ANY

Remote LAN

This is the remote security gateway for which the security services are to be provided. If the remote end is
a host, this should be configured as

None

NetBIOS Broadcast

Check this option to enable broadcasts over the connection. It will allow computers on the network to

share Microsoft file and printer sharing information.

Summary of Contents for RF600






























































































































































































Search results

Summary of Contents for RF600

Reviews:

Related manuals for RF600

Brands by name

Popular brands

Multitech RF600, User Manual

Search results

Summary of Contents for RF600

Reviews:

Related manuals for RF600

Brands by name

Popular brands