manualshive.com logo in svg

Multitech RF600, User Manual

The Multitech RF600 User Manual is a comprehensive guide that provides detailed instructions on how to make the most of your RF600 device. Easily downloadable for free from our website, this manual contains all the information you need to unlock the full potential of your product.

Share
Download
background image

Chapter 6 – RouteFinder Software  

Multi-Tech Systems, Inc. RouteFinderVPN RF760/660/600VPN User Guide (PN S000323D) 

83 

Network Setup > Interfaces 

Network Setup 

The Network Setup menus consist of Interface, PPP, PPPoE, DHCP Client, Dynamic DNS, Routes, Masquerading, SNAT, 
and DNAT screens. With the help of DNAT and SNAT, the destination and source address of the IP packets are converted. 
With 

Masquerading

 you can hide private networks from the outside world behind one official IP address.  

About Interfaces  

During initial installation, the RouteFinder automatically recognizes the installed network card and adds them to the 
configuration. 

Important:

 To change to an earlier configuration that you had saved, the RouteFinder must be re-installed. Use the 

Tracking > Backup

 function to read in the configuration you had set for the RouteFinder after the new installation.  

The RouteFinder must be the interface between the LAN and the Internet. All information packets must pass through the 
RouteFinder.  

We strongly recommend that you NOT put the interfaces of the RouteFinder physically together on one network 
segment via a hub or a switch, unless the segment is configured as a VLAN switch. To do so can lead to faulty ARP 
(Address Resolution Protocol) resolutions (ARP clash). Some operating systems (e.g., Microsoft Windows) cannot cope 
with this. That is why one network interface should be used per physical segment. 

 

About the Interfaces Screen 

The first network card (eth0) is always the interface to the internal network (LAN). It is called the 

trusted

 network.  

The second network card (eth1) is the interface to the external network (Internet). It is the 

untrusted

 network. 

The RouteFinder must have at least these two networks active to protect separate networks or network segments from 
each other.  

Example

:  The network cards could be connected in the following way:  

Network card 1: INTERNAL (to the local network)  
Network card 2: EXTERNAL (to the Internet)  
Network card 3: DMZ1 (DMZ for server) 

The host name and the default gateway must only be defined once. The host name is, for example, 

FIREWALL.yourdomain.com

; the gateway could be your Internet router.  

A suitable IP address must be entered for each network card. Let‘s assume that you are using a Class-C network for 
your internal network, in this case the entry for network card 1 could look like the following:  

Description: INTERNAL  
IP address: 192.168.2.1 (Default) 
Net mask: 255.255.255.0 (Default) 

The description is for clarity purposes and is used in all further configurations.  Make sure that the RouteFinder IP 
address is entered as the default gateway in the protected networks.  

Summary of Contents for RF600






























































































































































































Reviews:

No comments

Related manuals for RF600

ICP DAS USA HRT-310 Quick Start Manual preview
HRT-310
Brand: ICP DAS USA Pages: 7
ICP DAS USA UA-5200 Series Quick Start preview
UA-5200 Series
Brand: ICP DAS USA Pages: 4
NeoGate TE200 User Manual preview
TE200
Brand: NeoGate Pages: 41
Intel DK50 Series User Manual preview
DK50 Series
Brand: Intel Pages: 72
NETGEAR C6300BD Installation Manual preview
C6300BD
Brand: NETGEAR Pages: 6
Aalberts Flamco Flamconnect GW-10 Installation And Operating Instructions preview
Flamco Flamconnect GW-10
Brand: Aalberts Pages: 2
3Com OfficeConnect 3CR856-95 Installation Manual preview
OfficeConnect 3CR856-95
Brand: 3Com Pages: 2
LPN Plant lpnGate LoRaWAN Manual preview
lpnGate LoRaWAN
Brand: LPN Plant Pages: 20
ADTRAN SMART/RG SR555ac User Manual preview
SMART/RG SR555ac
Brand: ADTRAN Pages: 154
Juniper SRX 3400 Getting Started Manual preview
SRX 3400
Brand: Juniper Pages: 26
Juniper SRX 5800 Hardware Manual preview
SRX 5800
Brand: Juniper Pages: 536
ZyXEL Communications VMG3927-T50K Quick Start Manual preview
VMG3927-T50K
Brand: ZyXEL Communications Pages: 2
ActionTec GT704-WG Specifications preview
GT704-WG
Brand: ActionTec Pages: 2
Cradlepoint COR IBR350 Manual preview
COR IBR350
Brand: Cradlepoint Pages: 148
Hans Turck BL20-E-GW-CO Instructions For Use Manual preview
BL20-E-GW-CO
Brand: Hans Turck Pages: 53
Rintech RINT8CH Wireless Gateway Manual preview
RINT8CH Wireless Gateway
Brand: Rintech Pages: 2
Telstra Elite User Manual preview
Elite
Brand: Telstra Pages: 100
Lucent Technologies AnyMedia 4300 Specifications preview
AnyMedia 4300
Brand: Lucent Technologies Pages: 2

Brands by name

Popular brands

Load more brands