manualshive.com logo in svg

Multitech RF600, User Manual

The Multitech RF600 User Manual is a comprehensive guide that provides detailed instructions on how to make the most of your RF600 device. Easily downloadable for free from our website, this manual contains all the information you need to unlock the full potential of your product.

Share
Download
background image

Chapter 1 – Product Description, Features, and Overview 

Multi-Tech Systems, Inc. RouteFinderVPN RF760/660/600VPN User Guide (PN S000323D) 

12 

  

RouteFinder Front Panels 

RF760/660VPN Front Panel 

The R760VPN and the RF660VPN have 16 LEDs that show device and network operating status.  

 

       

          

For the RF760VPN, these LEDs are labeled 10/100/1G.   

•

 

When 10, the LED is Off. 

•

 

When 100, the LED is Green. 

•

 

When 1G, the LED is Orange.

 

 

RF760 / 660VPN LED Descriptions 

LAN LEDs 

Description 

LINK

 

LAN LINK LED - Indicates link integrity for the LAN Ethernet port. If the Ethernet link is valid at 10 Mbps, 
100 Mbps, or 1G (RF760VPN) the LINK LED is lit. If the Ethernet link is invalid, the LINK LED is off.  

ACT

 

ACT (Activity) LED - Indicates transmit and receive activity on the LAN Ethernet port. When activity is 
present on the LAN Ethernet port, the ACT LED is lit. When no activity is present on the LAN Ethernet 
port, the ACT LED is off. 

100MB or 
10/100/1G 

For the RF760VPN:

 If the Ethernet link is valid at 10 Mbps, the LAN LED is off. If the Ethernet link is 

valid at 100 Mbps, the LED is green. If the Ethernet link is valid at 1G, the LED is orange.

 

For the RF660VPN:

 The LAN 100MB LED is lit if the LAN Ethernet port is linked at 100 Mbps. The 

LAN 100 MB LED is off at 10 Mbps. 

WAN LEDs  Description

 

LINK 

WAN LINK LED - Indicates link integrity for the WAN Ethernet port. If the link is valid in either 10 Mbps, 
100 Mbps, or 1G (760VPN), the LINK LED is on; if the WAN Ethernet link is invalid, the LINK LED is off.

 

ACT 

WAN ACT (Activity) LED  - Indicates either transmit or receive activity on the WAN Ethernet port. When 
activity is present, the ACT LED is on; when no activity is present, the ACT LED is off. 

100MB or 
10/100/1G 

For the RF760VPN:

 If the Ethernet link is valid at 10 Mbps, the LED is off. If the Ethernet link is valid at 

100 Mbps, the LED is green. If the Ethernet link is valid at 1G, the LED is orange.

 

For the RF660VPN: 

The 100MB LED is lit if the LAN Ethernet port is linked at 100 Mbps. The 100 MB 

LED is off at 10 Mbps. 

DMZ LEDs  Description

 

LINK 

DMZ LINK LED - Indicates link integrity for the DMZ Ethernet port. If the link is valid in either 10 Mbps, 
100 Mbps, or 1G (760VPN) the LINK LED is on; if the DMZ Ethernet link is invalid, the LINK LED is off. 

ACT 

ACT (Activity) LED - Indicates either transmit or receive activity on the DMZ Ethernet port. When activity 
is present, the ACT LED is lit. When no DMZ Ethernet port activity is present, the ACT LED is off. 

100MB or 
10/100/1G 

For the RF760VPN:

 If the Ethernet link is valid at 10 Mbps, the LED is off. If the Ethernet link is valid at 

100 Mbps, the LED is green. If the Ethernet link is valid at 1G, the LED is orange.

 

For the RF660VPN:

 The 100MB LED is lit if the LAN Ethernet port is linked at 100 Mbps. The 100 MB 

LED is off at 10 Mbps. 

Modem 

Description of Modem LEDs

 

DCD 

DCD (Data Carrier Detect) LED - Lights when the modem detects a valid carrier signal from another 
modem; on when the modem is communicating with the other modem and off when the link is broken. 

RD 

RD (Read Data) LED - Flashes when the modem is receiving data from another modem. 

DTR 

DTR (Data Terminal Ready) LED - Lights when the operating system detects and initializes the modem. 

TD 

TD (Transmit Data) LED - Flashes when the modem is transmitting data to another modem. 

System 

Description of System LEDs

 

HDD ACT 

HDD ACT (Hard Disk Drive Activity) LED - Lights when the hard disk drive is accessed. 

ALERT

 

 

ALERT LED - Not used. 

 POWER 

POWER LED - Off when the RouteFinder is in a reset state. When lit, the RouteFinder is not in a reset 
state. 

 

Summary of Contents for RF600






























































































































































































Reviews:

No comments

Related manuals for RF600

Pace Telkom 921VNX User Manual preview
Telkom 921VNX
Brand: Pace Pages: 36
Synway SMG1002-2S Installation Manual preview
SMG1002-2S
Brand: Synway Pages: 7
netvox ZigBee ZL01A User Manual preview
ZigBee ZL01A
Brand: netvox Pages: 13
EAE DA110 Product Manual preview
DA110
Brand: EAE Pages: 22
Parker PVSG-IQAN-C2E1M2W1U1 User Manual preview
PVSG-IQAN-C2E1M2W1U1
Brand: Parker Pages: 70
Motorola 0171486N11 Quick Manual preview
0171486N11
Brand: Motorola Pages: 2
HP StorageWorks 12000 User Manual preview
StorageWorks 12000
Brand: HP Pages: 266
SST Automation GT200-PN-CO User Manual preview
GT200-PN-CO
Brand: SST Automation Pages: 32
Check Point QUANTUM SPARK 1600 Administration Manual preview
QUANTUM SPARK 1600
Brand: Check Point Pages: 285
Ness G1 Installation Manual preview
G1
Brand: Ness Pages: 50
WELLTECH 3701A Manual preview
3701A
Brand: WELLTECH Pages: 101
ZyXEL Communications AX7501-B0 User Manual preview
AX7501-B0
Brand: ZyXEL Communications Pages: 361
ADTRAN 17406368F1 Hardware Installation Manual preview
17406368F1
Brand: ADTRAN Pages: 34
Videx VproX 1000-M Manual preview
VproX 1000-M
Brand: Videx Pages: 11
RTA 460BMSTCP-NNA1 Product User Manual preview
460BMSTCP-NNA1
Brand: RTA Pages: 86
QEI ePAQ-9405 User Manual preview
ePAQ-9405
Brand: QEI Pages: 45
Banner SureCross DX70 Series Manual preview
SureCross DX70 Series
Brand: Banner Pages: 29
Taoglas EDGE Connect User Manual preview
EDGE Connect
Brand: Taoglas Pages: 19

Brands by name

Popular brands

Load more brands