Multitech RF600 Page 10 User Manual Download | Manualshive

Page: 10 / 189

background image

Chapter 1 – Product Description, Features, and Overview

Multi-Tech Systems, Inc. RouteFinderVPN RF760/660/600VPN User Guide (PN S000323D)

10

License Keys

System License Key

Each RouteFinder VPN ships with a unique individual system License Key, a 20-digit alphanumeric number.
You can enter and view License Key information from the RouteFinder's Web Management software at

Administration

> License Key > Open System License Key

. This screen shows the entered License Key number and indicates

whether it is a valid License Key number.
The License Key number is tied to and tracked with your RouteFinder's serial number. Whenever you require additional
licenses, you must first provide Multi-Tech with your current License Key and serial number information in order for us to
update your RouteFinder. With a valid License Key, you are entitled to use Multi-Tech’s Update service and support.

What to Do if a Trial License Key Expires

If the license key is a trial key, after expiry of the license period, the WAN interface of the RouteFinder will shut down. If
the DHCP client or PPPoE is enabled, they will be disabled. The user can connect to the RouteFinder through the LAN
interface and enter another valid license key to proceed further. The user has to manually enable the DHCP client /
PPPoE after entering another valid license key.

URL Categorization License Key

An 11-digit numeric key Universal Resource Locator (URL) Categorization License Key is also shipped with your
RouteFinder. This Key allows you to set up a URL database that limits clients’ access to places on the Internet by
blocking sites you do not want accessed. In other words, you can deny users access to various categories of Web sites
you select.

AntiVirus License Key

AntiVirus software with its corresponding License Key is available as a special purchase from Multi-Tech.

Where to Find the License Key Number Label

License Key numbers are printed on labels and are located:

•

On the bottom of the RouteFinder chassis

•

On the hard drive inside the chassis

•

On the front cover of the Quick Start Guide.

Additional RouteFinder Documentation

These additional RouteFinder reference documents are included on the system CD and are also posted on the Multi-Tech
Web site.

1.

The RouteFinder configured with DNAT and aliases.

2.

Setting up a PPTP server and a PPTP remote client.

3.

The VPN tunnel configured for manual mode example and IPSec pass-through in manual mode example.

4.

A quick start guide for the add-on product IPSec SSH client.

5.

Hard-Disk Drive Recovery.

«
...
8
9
10
11
12
...
»

Summary of Contents for RF600






























































































































































































Reviews:

No comments

Related manuals for RF600

Brand: Bivocom Pages: 49

Brand: Nortel Pages: 111

PagePro VIP-204A

Brand: Valcom Pages: 4

Brand: Juniper Pages: 2

Brand: RTA Pages: 78

ServiceRouter V3

Brand: Eurogard Pages: 4

Brand: Seneca Pages: 52

Brand: Seneca Pages: 99

Brand: Gardena Pages: 29

Brand: Planet Networking & Communication Pages: 38

VGW 20FS Series

Brand: Planet Networking & Communication Pages: 84

Brand: Primus Pages: 2

Brand: Perfectone Pages: 39

Brand: NanoSense Pages: 25

Brand: SmartRG Pages: 35

Brand: ActionTec Pages: 1

Brand: TP-Link Pages: 5

Brand: Vanderbilt Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands