manualshive.com logo in svg

Multitech RF600, User Manual

Share
Download
Multitech RF600 User Manual Download Page 61

Chapter 6 – RouteFinder Software  

Multi-Tech Systems, Inc. RouteFinderVPN RF760/660/600VPN User Guide (PN S000323D) 

61 

Networks & Services > Services

 

Networks & Services > Services  

On this screen you can set the RouteFinder protocol services. Protocols make ongoing administration easier and enable the 
configuration of user-defined services. These services are used in many of the other configuration settings on the system. A 
service protocol setting consists of a 

Name

, the

 Protocol

, the 

S-Port/Client 

(source port), and the 

D-Port/Server

 

(destination port).  

 

Add Services 

Name

   

Enter a unique name in Name entry field. You will need this later (e.g., to set packet filter 

rules). The name should not be present in the service or service group list. Using a space 
in the name is not allowed. After you have entered the name, click the 

Add

 button.

 

Protocol

  

Select from the following protocols: 

TCP, UDP, TCP & UDP, ICMP, AH, and ESP

.  When 

you select a protocol, the corresponding protocol fields will display. 

Source Port

 

  

Enter the source port for the service. The entry options are a single port (e.g. 80), a list of 

port numbers separated by commas (e.g. 25, 80, 110), or a port range (e.g. 1024:64000) 
separated by a colon (

:

). It will be displayed if the type of the protocol is TCP, UDP, or 

TCP+UDP. 

Destination Port 

 

Enter the destination port for the protocol. It is displayed if the type of protocol is TCP, 

UDP, or TCP+UDP. 

ICMP Code

  

Specifies the ICMP type. It is displayed if the type of protocol is ICMP and the ICMP Type 

is 

Redirect Network

, 

Network Unreachable

, or 

Time to Live Exceeded

. 

Summary of Contents for RF600






























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands