Multitech RF600 User Manual Download Page 118

Page: 118 / 189

Chapter 6 – RouteFinder Software

Multi-Tech Systems, Inc. RouteFinderVPN RF760/660/600VPN User Guide (PN S000323D)

118

Statistics & Logs > Networks

Statistics and Logs

Networks

This menu displays an analysis of the RouteFinder network interface details, routing, and network connections.

Network Interface Cards

Click the

Interface Details

button to display the Interface details about all the interfaces (Ethernet, IPSec, PPP,

and local interfaces).

Routing Table

Click

Routing Table

to display the Kernel IP routing table of all entered routes. The information includes

Destination, Gateway, Genmask

Flags

Metric

Ref(Reference), and Use, Iface (User Interface).

Important Note:

Interface routes are inserted by the system and cannot be edited. Additional routes can be

added in

Network Setup > Routes

. This is an example of the Statistics & Logs Routing Table report.

How to Read the Table

Destination

The address of the target system.

Gateway

The address of the next-hop router.

Use Iface (User Interface)

Indicates the name of the local interface from which the packet is to be sent.

Summary of Contents for RF600






























































































































































































Search results

Summary of Contents for RF600

Reviews:

Brands by name

Popular brands

Multitech RF600, User Manual

Search results

Summary of Contents for RF600

Reviews:

Brands by name

Popular brands