manualshive.com logo in svg

Multitech RF600, User Manual

The Multitech RF600 User Manual is a comprehensive guide that provides detailed instructions on how to make the most of your RF600 device. Easily downloadable for free from our website, this manual contains all the information you need to unlock the full potential of your product.

Share
Download
background image

Appendix J – License Agreements 

Multi-Tech Systems, Inc. RouteFinderVPN RF760/660/600VPN User Guide (PN S000323D) 

171 

and/or the Subscription Lists, if any. Licensee may not permit third parties to benefit from the use or functionality of the Software via a 
service bureau or other arrangement.  Licensee may not copy the Software except as expressly permitted in Section 2 above. 
Licensee agrees that the use of the Software may be restricted by applicable laws and regulations, including without limitation, privacy laws.  
Licensee represents and warrants that Licensee’s use of the Software shall be in compliance with any applicable laws and regulations, 
including without limitation, privacy laws, and that SurfControl shall have no duty to and shall not investigate Licensee’s use of the Software 
or right to use the Software. Licensee agrees to indemnify SurfControl against any claims that Licensee’s use of the Software violates the 
rights of any third party or any applicable laws and/or regulations of any jurisdictions, except to the extent the Software infringes any patent, 
copyright or trade secret of a third party. 

6. TRANSFER RESTRICTIONS 

This Software is licensed only to Licensee and may not be transferred to anyone without the prior written consent of SurfControl.  Any 
authorized transferee of the Software shall agree in writing to be bound by the terms and conditions of this License. In no event may 
Licensee transfer, assign, rent, lease, loan, time-share, sublicense, sell or otherwise dispose of the Software on a temporary or permanent 
basis except as expressly provided herein. This License shall benefit SurfControl and its successors and assigns. 

7. TERMINATION 

This License is effective on the date Licensee installs the Software and shall continue until terminated. This License will terminate 
automatically without notice from SurfControl if Licensee fails to comply with any provision of this License or if Licensee becomes bankrupt, 
goes into liquidation, suffers or is the subject of any winding-up petition, makes an arrangement with Licensee’s creditors, has an 
administrator or receiver appointed or suffers or files any similar action in consequence of debt. Licensee may terminate this License by 
destroying all copies of the Software. Upon termination Licensee shall destroy all copies of the Software. Upon termination there will be no 
refund of any monies or other consideration paid by Licensee. The following Sections shall survive termination of this License for any 
reason: 1, 3, 7, 9, 10, 11, 13, 14, 15 and 16. 

8. MAINTENANCE AND UPGRADE POLICY 

SurfControl will provide maintenance and support for the Software solely pursuant to Licensee’s purchase of Maintenance Services. 
SurfControl may create, from time to time, upgraded versions of the Software. SurfControl will only make such upgrades available to (a) 
Licensee and authorized transferees, if any, who have completed the License Registration Form during the Software installation process 
and paid any applicable upgrade fees or (b) Licensee pursuant to the Maintenance Services, if applicable. 
This License does not provide Licensee with any right to any upgrades or future versions of the Subscription Lists.  Licensee may have 
rights to receive updates to certain Subscription Lists made generally available by SurfControl during the applicable term of Licensee’s 
subscription to such Subscription Lists (the “Subscription”), if any. 

9. CHOICE OF LAW 

This License shall be governed and construed in accordance with the laws of the United States of America and the State of California as 
applied to agreements entered into and to be performed entirely within California between California residents.  This License shall be 
deemed to have been made and entered into in Santa Clara, California.  The parties hereby submit to the non-exclusive jurisdiction of, and 
waive any venue objections against, the United States District Court for the Northern District of California, San Jose Branch and the Superior 
and Municipal Courts of the State of California, Santa Clara County, in any litigation arising out of or in connection with the License. The 
parties expressly disclaim application of the United Nations Convention on Contracts for the International Sale of Goods. 

10. LIMITED WARRANTY AND DISCLAIMER OF WARRANTY 

SURFCONTROL WARRANTS THAT ON THE DATE THE LICENSE REGISTRATION FORM IS COMPLETED AND THE SOFTWARE IS INSTALLED, THE 
SOFTWARE WHEN USED PROPERLY, WILL SUBSTANTIALLY CONFORM WITH THE FUNCTIONS AND FACILITIES DESCRIBED IN THE 
DOCUMENTATION AND IN ANY WRITTEN OPERATION GUIDE TO THE SOFTWARE GENERALLY MADE AVAILABLE BY SURFCONTROL.  THIS 
WARRANTY SHALL ONLY BE EFFECTIVE IF THE LICENSE REGISTRATION FORM IS COMPLETED AND SUBMITTED AT THE TIME THE SOFTWARE IS 
INSTALLED.  THE FOREGOING WARRANTY IS VOID, HOWEVER, IF FAILURE OF THE SOFTWARE HAS RESULTED FROM ACCIDENT, ABUSE, OR 
MISAPPLICATION.  
LICENSEE’S SOLE AND EXCLUSIVE REMEDY AND SURFCONTROL’S SOLE AND EXCLUSIVE LIABILITY FOR FAILURE OF THE SOFTWARE TO MEET 
THE FOREGOING WARRANTY WILL BE, AT SURFCONTROL’S OPTION, TO EITHER REPAIR OR REPLACE THE DEFECTIVE SOFTWARE OR MEDIA, IF 
APPLICABLE.  THIS REMEDY IS SUBJECT TO LICENSEE’S FULL COMPLIANCE WITH THE TERMS AND CONDITIONS OF THIS LICENSE.  LICENSEE 
MUST NOTIFY SURFCONTROL WITHIN THIRTY (30) DAYS AFTER INSTALLING THE SOFTWARE OF ANY DEFECT IN ORDER TO RECEIVE THE 
REMEDY STATED ABOVE.  ANY REPLACEMENT MEDIA WILL BE WARRANTED FOR THE REMAINDER OF THE ORIGINAL WARRANTY PERIOD.  
OUTSIDE THE UNITED STATES, THIS REMEDY IS NOT AVAILABLE TO THE EXTENT SURFCONTROL AND/OR ITS LICENSORS ARE SUBJECT TO 
RESTRICTIONS UNDER UNITED STATES EXPORT CONTROL LAWS AND REGULATIONS. 
EXCEPT FOR THE WARRANTIES STATED IN THIS SECTION 10, THE SOFTWARE, INCLUDING, WITHOUT LIMITATION, THE SUBSCRIPTION LISTS, IF 
APPLICABLE, AND ANY DOCUMENTATION, IS PROVIDED “AS IS” WITHOUT ADDITIONAL WARRANTY OF ANY KIND, EXPRESS OR IMPLIED.  
FURTHER, SURFCONTROL DOES NOT WARRANT, GUARANTEE OR MAKE ANY REPRESENTATIONS REGARDING THE USE, OR THE RESULTS OF 
USE, OF THE SOFTWARE, SUBSCRIPTION LISTS OR WRITTEN MATERIALS PROVIDED BY SURFCONTROL IN TERMS OF CORRECTNESS, 
ACCURACY, COMPLETENESS, RELIABILITY, CURRENTNESS, OR OTHERWISE.  SURFCONTROL SPECIFICALLY DOES NOT WARRANT THAT THE 
SOFTWARE OR SUBSCRIPTION LISTS WILL PREVENT ACCESS TO OFFENSIVE OR OBSCENE MATERIAL, OR SPAM OR VIRUSES FROM AFFECTING 
LICENSEE’S COMPUTER NETWORK.  LICENSEE ACKNOWLEDGES THAT IT IS LICENSEE’S SOLE RESPONSIBILITY TO MAINTAIN SUCH 
WORKPLACE POLICIES AND PROCEDURES TO ENSURE AN ENVIRONMENT FREE OF HOSTILITY AND SEXUAL HARASSMENT.  LICENSEE 
ASSUMES THE ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF THE SOFTWARE AND SUBSCRIPTION LISTS, IF ANY. 
SURFCONTROL MAKES NO OTHER WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE AVAILABILITY 
OF SURFCONTROL’S SITE ON THE WORLDWIDE WEB, OR THE IMPLIED WARRANTIES OF NON-INFRINGEMENT OF THIRD PARTY RIGHTS, 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 

 No oral or written information or advice given by SurfControl, its dealers, 

distributors, agents or employees shall create a warranty or in any way increase the scope of this warranty and Licensee may not rely on 
any such information or advice. 

11. LIMITATION OF LIABILITY 

IN NO EVENT WILL SURFCONTROL OR ITS AFFILIATES, SUPPLIERS, AND/OR LICENSORS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, 
ECONOMIC, COVER, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE, SUBSCRIPTION LISTS, 
USER DOCUMENTATION, OR RELATED TECHNICAL SUPPORT, INCLUDING, WITHOUT LIMITATION, DAMAGES OR COSTS RELATING TO THE LOSS 
OF PROFITS, BUSINESS, GOODWILL, DATA, OR COMPUTER PROGRAMS, OR ANY DAMAGES RELATED TO ACCESS OR EXPOSURE TO OFFENSIVE 
OR OBSCENE MATERIAL, SPAM AND/OR VIRUSES, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL THE TOTAL 
LIABILITY OF SURFCONTROL AND ITS AFFILIATES, SUPPLIERS, AND/OR LICENSORS EXCEED THE AMOUNT PAID BY LICENSEE FOR THE 
SOFTWARE. 
THESE LIMITATIONS APPLY TO ALL CAUSES OF ACTION IN THE AGGREGATE, INCLUDING WITHOUT LIMITATION, BREACH OF CONTRACT, 
BREACH OF WARRANTY, SURFCONTROL’S NEGLIGENCE, STRICT LIABILITY, MISREPRESENTATION AND OTHER TORTS. 

Summary of Contents for RF600






























































































































































































Reviews:

No comments

Related manuals for RF600

B&B Electronics GW-7472 User Manual preview
GW-7472
Brand: B&B Electronics Pages: 60
Vanguard 3400 Series Installation Manual preview
3400 Series
Brand: Vanguard Pages: 74
NeoGate TG200 User Manual preview
TG200
Brand: NeoGate Pages: 37
Icom VE-PG2 Easy Configuration Manual preview
VE-PG2
Brand: Icom Pages: 2
Icom VE-PG2 Instruction Manual preview
VE-PG2
Brand: Icom Pages: 160
Yes Zoom Quick Start Manual preview
Zoom
Brand: Yes Pages: 2
nedis WIFIZBT10CWT Manual preview
WIFIZBT10CWT
Brand: nedis Pages: 44
Cellio DS0052V User Manual preview
DS0052V
Brand: Cellio Pages: 9
Thompson DWG875 User Manual preview
DWG875
Brand: Thompson Pages: 89
SIEB & MEYER 0362157 Manual preview
0362157
Brand: SIEB & MEYER Pages: 40
Plugwise Stretch 3 Installation Manual preview
Stretch 3
Brand: Plugwise Pages: 16
2N OfficeRoute User Manual preview
OfficeRoute
Brand: 2N Pages: 113
2Wire HomePortal 1000 Installation Manual preview
HomePortal 1000
Brand: 2Wire Pages: 44
2Wire 2710HGV-TNZ User Manual preview
2710HGV-TNZ
Brand: 2Wire Pages: 86
Tekkeon myTalker ET7000 Specification Sheet preview
myTalker ET7000
Brand: Tekkeon Pages: 2
Comtrend Corporation VR-3063 User Manual preview
VR-3063
Brand: Comtrend Corporation Pages: 70
Aluratek CDW530AM User Manual preview
CDW530AM
Brand: Aluratek Pages: 63
BossPac WASP NEST2 User Manual preview
WASP NEST2
Brand: BossPac Pages: 26

Brands by name

Popular brands

Load more brands