manualshive.com logo in svg

Multitech RF600, User Manual

Share
Download
Multitech RF600 User Manual Download Page 144

Appendix A – Disposition of Events  

Multi-Tech Systems, Inc. RouteFinderVPN RF760/660/600VPN User Guide (PN S000323D) 

144 

 

Inbound Access (DNAT with Connection Tracking) 

 

Figure 3 

–

 Inbound Access (DNAT with Connection Tracking) 

Description of Figure 3 

The Access request originated from the source (204.26.122.9) to the destination (204.54.39.103), which is further 
DNATTED to the ip-address 192.168.1.76 on port 20:21.  
The above figure illustrates a capture of the FTP service.  

•

 

Slno 1, in the above snapshot corresponds to the control connection (Remarks in the second half of the snapshot 

is a continuation of the capture). 

Remarks: 

“

Inbound Accepted

 

DNAT ip:port = 192.168.1.76:20:21

” 

Src:

 204.26.122.9, 

Dst:

 202.54.39.103, 

DNATTED to

 192.168.1.76 on Port 20:21. 

•

 

Slno 2, corresponds to a PASV Data connection. (Src:204.26.122.9, destined to 202.54.39.103, which in turn is 

DNATTED to 192.168.1.76 on port 62191). 

Remarks: 

“

Inbound Accepted

  

[SRC=204.26.122.9:DST=202.54.39.103:SPORT=41216:DPORT=21]

        

Dnat ip:port = 192.168.1.76:21

” 

o

 

Inbound Accepted – 

Inbound Log 

o

 

[SRC=204.26.122.9:DST=202.54.39.103:SPORT=41216:DPORT=21]

 – This corresponds to the 

“

CONTROL connection information

” for this data connection. 

o

 

Dnat ip:port = 192.168.1.76:21

” – This corresponds to the “

CONTROL connection’s DNATTED 

ipaddress

” for this data connection. 

•

 

Slno 3, corresponds to the ACTIVE Data connection originated from 192.168.1.76 (on SRC-PORT 20), which is 

masqueraded to a SRC:202.54.39.103 at the WAN interface of the candidate firewall, destined to 204.26.122.9. 

Remarks: 

“

Inbound Accepted

  

[SRC=204.26.122.9:DST=202.54.39.103:SPORT=41216:DPORT=21]

        

Dnat ip:port = 192.168.1.76:21

” 

o

 

Inbound Accepted – 

Inbound Log 

o

 

[SRC=204.26.122.9:DST=202.54.39.103:SPORT=41216:DPORT=21]

 – This corresponds to the 

“

CONTROL connection information

” for this data connection. 

o

 

Dnat ip:port = 192.168.1.76:21

” – This corresponds to the “

CONTROL connection’s DNATTED 

ipaddress

” for this data connection. 

 

Summary of Contents for RF600






























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands