manualshive.com logo in svg

Multitech RF600, User Manual

Share
Download
Multitech RF600 User Manual Download Page 26

Chapter 2 – Installation  

Multi-Tech Systems, Inc. RouteFinderVPN RF760/660/600VPN User Guide (PN S000323D) 

26 

 

Navigating Through the Screens 

Before using the software, you may find the following information about navigating the screens and the structuring of the 
menus helpful. 

The Web Management Screen 

 

Menu Bar 

Sub Menu 

  

 

    
     
   Screen 

   Buttons

 

Screen 
Name 
 

  Work/Input
     Area

 

 

 

RouteFinder Menu Bar 

 

Menu Selections

 

Administration

 

Set up system parameters, Administrative Access, User Authentication; enter licenses 
and certificates, etc. See entire list of functions on next page. 

Networks & Services 

Define networks, services, and groups to make them available to be used by other 
functions such as allowed networks, packet filters, VPN, and proxies. 

Proxy 

Set up proxies. 

Network Setup 

Set up the LAN, WAN, and DMZ Ethernet ports; PPP modem link, etc.  

DHCP Server 

Configure the DHCP server settings. 

Tracking 

Set up tracking of all packets through the network ports in the RouteFinder VPN, set up 
automatic download and upgrade of packages from a specified Update server, set up 
import/export backup configurations.  

Packet Filters 

Define filter rules and ICMP rules. 

VPN  

Virtual Private Network.  Set up a secure communication tunnel to specific Internet 
systems.  

Statistics & Logs 

View and download all the statistics and log files maintained by your system. 

Screen Buttons 

Home 

The main screen. 

Wizard Setup 

Change passwords and quickly set up your RouteFinder VPN with the basic 
configuration that will set it up as a firewall. 

Help 

Describes what to do on each screen.  

Logout 

Logout and return to the login screen. 

Summary of Contents for RF600






























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands